<< مقالات لاتين >>
<< بر اساس عنوان >>
1
F & H monopoles Original Research Article
2
F 12511, a novel ACAT inhibitor, and atorvastatin regulate endogenous hypercholesterolemia in a synergistic manner in New Zealand rabbits fed a casein-enriched diet
3
F gene recombination between genotype II and VII Newcastle disease virus
4
F wave as a measure of selective suppression of the anterior horn cells involving only the volitionally inactivated muscle
5
F wave duration in mild S1 radiculopathy: comparison between the affected and unaffected sides
6
F wave study in amyotrophic lateral sclerosis: Assessment of balance between upper and lower motor neuron involvement
7
f(R) gravity theory and CMBR constraints
8
F, Cl, and S concentrations in olivine-hosted melt inclusions from mafic dikes in NW Namibia and implications for the environmental impact of the Paraná–Etendeka Large Igneous Province
9
F. Armstrong and K. Blundell, Editors, Energy … Beyond Oil, Oxford University Press (2007) 240 pp., £25, Hardbound, ISBN-13: 978-0-19-920996-5 http://www.oup.com/.
10
F. Barberini, R. Franci and L. Toti Rigatelli, Editors, Gino Arrighi. La matematica dellʹEtà di Mezzo. Scritti scelti, Edizioni ETS, Pisa (2004) ISBN 88-467-1043-6 450 pp. (paperback). 22.00€ [euros].
11
F. Bemak, R.C. Chung and P.B. Pedersen, Counseling Refugees: A Psychosocial Approach to Innovative Multicultural Interventions, Greenwood Press, Westport CT (2003) ($ 64.95 (Cloth), 256 pp.).
12
F. Boller and J. Grafman, Handbook of Neuropsychology Vol. 7, Elsevier, Amsterdam (1992).
13
F. Bronner, Nutritional and Clinical Management of Chronic Conditions and Diseases, CRC Taylor & Francis, Boca Raton, Florida (2006) ISBN 0-8493-2765-2.
14
F. Brown, L.R. Haaheim, J.M. Wood and G.C. Schild, Laboratory correlates of immunity to influenza—A reassessment, Karger, London (2003) Basel.
15
F. Ferraty and P. Vieu, Nonparametric functional data analysis: Theory and practice, Springer Series in Statistics, Springer, Berlin (2006) ISBN 978-0-387-30369-7, p. XX, 268pp 29 illus., Hardcover..
16
F. Ferraty and P. Vieu, Nonparametric functional data analysis: Theory and practice, Springer Series in Statistics, Springer, Berlin (2006) ISBN 978-0-387- 30369-7, p. XX, 268pp 29 illus., Hardcover..
17
F. Furubo, R. Rist and R. Sandahl, Editors, International atlas of evaluation, Transaction Publishers, New Brunswick, NJ (2002) (Reviewed by Craig Russon, President, Programme Planning & Evaluation, Inc.).
18
F. Gobet, A. de Voogt, J. Retschitzki, Moves in Mind: The Psychology of Board Games.
19
F. Goodson, Review of the Evolution and Function of Cognition, Lawrence Erlbaum (2003).
20
F. H. Jacobi on faith, or what it takes to bean irrationalist
21
F. Hunter, Everyday Homeopathy for Animals, 1st ed., Beaconsfield Publishers, 2004, ISBN 0 9085 8454X, 479 pp; 20 (soft)
22
F. John Lewis, MD: 1916–1993
23
F. Renata and F. John, Organizational Discourse: A Language-Ideology-Power Perspective, Westport, CN, Praeger (2004) paper, 240 pp., $89.95.
24
F.A. Mettler and M.J. Guiberteau, Editors, Essentials of nuclear medicine imaging, Saunders/Elsevier, Philadelphia, PA (2006) 512 pages, over 600 illustrations, US$95.00, ISBN: 0-7216-0201-0..
25
F.A.L.C.A.D.E.: a fuzzy software for the energy and environmental balances of products
26
F.A.L.C.A.D.E.: a fuzzy software for the energy and environmental balances of products
27
F.K. Erhard Voeltz, Christa Killian-Hatz (Eds.), Typological Studies in Language 44, John Benjamins Publishing Co., Ideophones, 2001 (x, 436 pp., US and Canada: US$ 114.00, Rest of world: €125.00, hardcover, ISSN 0167-7373).
28
F.L. Pryor, Editor, Economic Systems of Foraging, Agricultural and Industrial Societies, Cambridge University Press, Cambridge (2005) 332 pages, £40 (Hardback), £17.99 (Paperback), ISBN 0-521-84904-7 (Hardback), 0-521-61347-7 (Paperback).
29
F.M. Pulselli, S. Bastianoni, N. Marchettini, E. Tiezzi, The Road to Sustainability: GDP and Future Generations WIT Press, Southhampton, UK, 197 p.
30
F.M. Quinn, Principles and Practice of Nurse Education, Croom Helm, 1980, ISBN 0-85664-891-4, £13.95.
31
F.O. Lin, Designing distributed learning environments with intelligent software agents, Information Science Publishing, Hershey, PA (2005) ISBN 159140501-7, p. 311 (paper), US$69.95.
32
F: Screening, case finding and risk factor assessment in the general hospital, 17.06.00, 15:45–17:15
33
F+ ion implantation induced cell attachment on intraocular lens
34
F+ laser performance and interaction of Cu, Ag and Au at the reduced oxygen coordination of MgO surface: first principles calculations
35
F+ RNA coliphage-based microbial source tracking in water resources of South Korea Original Research Article
36
F− and OH− induced monodeprotonation of a lacunar cationic dibenzotetraaza[14]annulene: experimental evidence of tautomerism in a monoanionic macrocycle
37
F−/Cl− mediated microwave assisted breakdown of cellulose to glucose
38
F−-Induced ‘turn-on’ fluorescent chemosensor based on 1,3-alt thiacalix[4]arene
39
F003 The relation between serum fibrinogen and magnesium with relative index of cpkmb/cpk activity in myocardial infarction
40
F005 Minimally invasive coronary artery surgery in women
41
F012 Enalapril upregulates smooth muscle myosin heavy chain isoform in intramyocardial arteries from spontaneously hypertensive rats
42
F013 The status of major risk factors of atherosclerosis in children and adolescents of Isfahan
43
F020 Tumor necrosis factor-α-mediated signaling molecules in the regulation of macrophage scavenger receptor
44
F021 Age-related structural reorganization of human aortic endothelium: role in atherogenesis
45
F025 Cardiovascular disease situation and preventive actions in Iran
46
F030 The association of heart rate urinary electrolytes excretion in Isfahan population
47
F036 Response to bezafibrate in combined hyperlipidaemia
48
F037 Effect of synthetic HMG-COA reductase inhibitors on cholesterol synthesis in various human cell types and on progesterone secretion from human granulosa cells in culture
49
F042 Reactive oxygen species are involved in shear stress-induced intracellular adhesion molecule-1 (ICAM-1) expression in endothelial cells
50
F048 Endothelial heterogeneity, viral infection and human atherosclerosis
51
F052 Effect of dietary fish oil on plasma lipoprotein cholesterol in rats fed a diet enriched in cholesterol and sucrose
52
F053 Macrophage scavenger receptor-mediated signal transduction
53
F054 Biochemical characterization of an unknown apolipoprotein and its implications for dyslipidemia and lipid peroxidation
54
F060 The antioxidative capacity of black bean extract
55
F063 Assessment of plasma lipids status of long-term vegetarian
56
F068 Myocardial protective effect of trilinolein: a triacylglycerol isolated from the medicinal plant panax pseudoginseng
57
F069 The influence of probucol on PDGF-A and PDGF-B gene expression in peropheral blood monocytes (PBM) in patients after myocardial infraction
58
F073 Effect of degree of obesity on coronary artery disease and its major risk factors
59
F076 The prevalence of diabetes mellitus based on different diagnostic criteria in an urban community in Isfahan/Iran
60
F077 Inhibition of lysine residue of d2-dopamine receptors results in decrease dopaminergic and increase b-adrenergic effect
61
F080 Influence of current- and long-term metabolic state on PTCA-outcome in diabetics
62
F082 Investigation of mutations and polymorphisms in the lipoprotein lipase gene
63
F0ROM A STATIC TO A DYNAMIC CONCEPT OF RISK: THE CIRCADIAN EPIDEMIOLOGY OF CARDIOVASCULAR EVENTS
64
f1(1285) formation in two-photon collisions at LEP
65
f1: a code to compute Appellʹs F1 hypergeometric function Original Research Article
66
F127-based multi-block copolymer additives with poly(N,N-dimethylamino-2-ethyl methacrylate) end chains: The hydrophilicity and stimuli-responsive behavior investigation in polyethersulfone membranes modification
67
F144 Long-term effect of a HMG-CoA reductase inhibitor, pravastatin, in glomerulonephritis patients with hyperlipidaemia: an 18-month experience
68
F-16/SPICE Separation Analysis-Summary of the Risk-Reduction Phase Program
69
F-18 FDG PET in detecting uterine leiomyoma
70
F-18 FDG PET/CT Imaging of Eccrine Sweat Gland Carcinoma of the Scrotum with Extensive Regional and Distant Metastases
71
F-18 FDG PET/CT imaging of primary hepatic neuroendocrine tumor
72
F-18 FDG PET-CT Influences Target Delineation When Combined With Standard CT-Based Radiotherapy Planning in the Palliative Setting in Malignant Pleural Mesothelioma; an Exploratory Study
73
F-18 production with the TOP linac injector
74
F-18 production with the TOP linac injector
75
F-18-FDG uptake is a reliable predictory of functional recovery of akinetic but viable infarct regions as defined by magnetic resonance imaging before and after revascularization
76
F-18-Fluorodeoxyglucose PET Imaging Alters Clinical Decision Making in Patients With Impaired Ventricular Function
77
F-18-Fluorodeoxyglucose Positron Emission Tomography Imaging-Assisted Management of Patients With Severe Left Ventricular Dysfunction and Suspected Coronary Disease: A Randomized, Controlled Trial (PARR-2) Original Research Article
78
F1-ATP Synthaseβ-Subunit and CytochromecTranscriptional Regulation in Right Ventricular Hemodynamic Overload and Hypertrophically Stimulated Cardiocytes
79
F2 laser etching of GaN
80
F2 laser induced oxidation of inorganic material
81
F2 layer characteristics and electrojet strength over an equatorial station Original Research Article
82
F2 layer response to geomagnetic disturbances in Eastern Asia under the low solar activity Original Research Article
83
F2+ defect based model for tunable laser activity and interaction of atomic halogens (F, Cl and Br) at the low coordinated surfaces of LiH: ab initio calculations
84
F2FMI: A toolkit for facilitating face-to-face mobile interaction
85
F2-isoprostane generation in isolated ferret lungs after oxidant injury or ventilated ischemia
86
F2-Isoprostane level is associated with the angiotensin II type 1 receptor -153A/G gene polymorphism
87
F2-isoprostanes are not just markers of oxidative stress
88
F2-isoprostanes: sensitive and specific non-invasive indices of lipid peroxidation in vivo
89
F2-laser modification and patterning of silicone films
90
F3 layer feature under low and medium solar activity observed at a Chinese low latitude station Fuke Original Research Article
91
F3/Contactin Acts as a Functional Ligand for Notch during Oligodendrocyte Maturation
92
F4 receptor-independent priming of the systemic immune system of pigs by low oral doses of F4 fimbriae
93
F4 receptor-independent priming of the systemic immune system of pigs by low oral doses of F4 fimbriae
94
F42. Minimal sufficiency of a complete sufficient statistic
95
F420-dependent enzymes – potential for applications in biotechnology
96
F43. Irrelevance of labels in estimation
97
F44. Fallacy in the proof of Birnbaumʹs theorem: the reply by Berger (F28)
98
F44B. A reply to F44A
99
F45. A comment on ‘the insufficiency of some definitions of sufficiency’, F25
100
F46. Varieties of the regression fallacy
101
F47. Conditionality in structural inference
102
F48. A lacuna in the definition of Pitman-closerness
103
F49. Nonunique estimates of ability
104
F4E R&D programme and results on in-vessel dust and tritium
105
F4E studies for the electromagnetic analysis of ITER components
106
F5 contributions to the non-Abelian Born–Infeld action from a supersymmetric Yang–Mills five-point function Original Research Article
107
FA Burgener, M Kormano and T Pudas, Differential diagnosis in conventional radiology (3rd ed.), Thieme, New York/Stuttgart (2008) ISBN 978-1-58890-275-7 879 pages, 2190 illustrations, US$249.95.
108
FA Burgener, M Kormano and T Pudas, The chest x-ray. Differential diagnosis in conventional radiology (2nd revised edition), Thieme, Stuttgart, New York (2006) ISBN 1-58890-446-6 [216 pages, 498 illustrations, USA $99.95].
109
FA Mettler Jr. and AC Upton, Medical Effects of Ionizing Radiation (3rd edition.), Saunders/Elsevier Inc., Philadelphia, PA (2008) ISBN 978-0-7216-0200-4 115 illustrations, numerous tables.
110
FA(Ga+,In+,Tl+) tunable laser activity and interaction of halogen atoms (F,Cl,Br,I,At) at the (0 0 1) surface of KCl crystal: ab initio calculations
111
FA1:La2+ and FA2:Sc2+ color center lasers and color image sensitization at the low coordination (0 0 1) surface of AgBr by ab initio calculations
112
FA15, a hydrophobic derivative of ferulic acid, suppresses inflammatory responses and skin tumor promotion: comparison with ferulic acid
113
FA2BOUG—A FORTRAN 90 code to compute Bouguer gravity anomalies from gridded free-air anomalies: Application to the Atlantic-Mediterranean transition zone
114
Faà di Bruno’s formula and the distributions of random partitions in population genetics and physics
115
Faà di Brunoʹs formula, lattices, and partitions
116
FAAS determination of metal nutrients in fish feed after ultrasound extraction
117
FAB CIDMS/MS analysis of partially methylated maltotrioses derived from methylated amylose: a study of the substituent distribution Original Research Article
118
Fab Fragments Directed against Laminin 5 Induce Subepidermal Blisters in Neonatal Mice
119
Fab MOR03268 Triggers Absorption Shift of a Diagnostic Dye via Packaging in a Solvent-shielded Fab Dimer Interface
120
Fab′-Induced Folding of Antigenic N-Terminal Peptides from Intrinsically Disordered HIV-1 Tat Revealed by X-ray Crystallography
121
Faba bean (Vicia faba var. minor) as a protein source for organic chickens: performance and carcass characteristics
122
Faba bean productivity under rainfed and supplemental irrigation in northern Syria
123
Faber polynomial coefficient estimates for bi-univalent functions defined by subordinations
124
Faber polynomial coefficient estimates for certain classes of bi-univalent functions defined by using the Jackson (p,q)-derivative operator
125
Fabergé optics and edge filter for a wood powder fuelled thermophotovoltaic system
126
Faber–Krahn type inequalities for trees
127
FaBiO and CiTO: Ontologies for describing bibliographic resources and citations
128
Fabled service: Ordinary acts, extraordinary outcomes : by Betsy Sanders. San Diego, CA: Pfeiffer & Co., 1995. 128p. $19.95. ISBN 0-89384-270-2 (Warren Bennis Executive Briefing Series). (Inserted into spiral binder together with
129
Fabless or IDM? What the Future Holds for Both: An Interview with Cirrus Logic Chairman, Michael L. Hackworth
130
FABP9 Mutations Are Not Detected in Cases of Infertility due to Sperm Morphological Defects in Iranian Men
131
Fabric analyses of some Saudi Arabian pediment gravels
132
Fabric Analysis: Application to Paleolithic Sites
133
Fabric and elastic principal directions of cancellous bone are closely related
134
Fabric anisotropy and its influence on physical weathering of different types of Carrara marbles
135
Fabric Architecture and Flexible Design
136
Fabric area network – a new wireless communications infrastructure to enable ubiquitous networking and sensing on intelligent clothing
137
Fabric attractors in general triclinic flow systems and their application to high strain shear zones: A dynamical system approach
138
Fabric control on strain and rupture of heterogeneous shale samples by using a non-conventional mechanical test
139
Fabric cutting application of FeAl-based alloys
140
Fabric cutting application of FeAl-based alloys
141
Fabric defect detection based on multiple fractal features and support vector data description
142
Fabric defect detection based on multiple fractal features and support vector data description
143
Fabric defect detection by Fourier analysis
144
Fabric development as the key for forming ductile shear zones and enabling plate tectonics
145
Fabric development during exhumation from ultrahigh-pressure in an eclogite-bearing shear zone, Western Gneiss Region, Norway
146
Fabric development in (Mg,Fe)O during large strain, shear deformation: implications for seismic anisotropy in Earth’s lower mantle
147
Fabric development in a weathering profile at a basement–cover interface, the sub-Cambrian peneplain, Israel: Implications for decollement tectonics
148
Fabric domains in quartz mylonites: localized three dimensional analysis of microstructure and texture
149
Fabric drape simulation by solid-shell finite element method
150
Fabric evidence for granodiorite emplacement with extensional shear zones in the Variscan Gredos massif (Spanish Central System)
151
Fabric evolution in Salem-Attur Shear Zone, South India, and its implications on the kinematics
152
Fabric Evolution of Ellipsoidal Arrays with Different Particle Shapes
153
Fabric filter bag investigation following field testing of sorbent injection for mercury control at TXUʹs Big Brown Station
154
Fabric of Palaeolithic levels: methods and implications for site formation processes
155
Fabric reactivation: an example from the Hualapai Mountains, NW Arizona, USA
156
Fabric stability in oblique convergence and divergence
157
Fabric studies on contaminated mineral layers in composite liners
158
Fabric superposition in upper mantle peridotite, Red Hills, New Zealand
159
Fabric surface properties affected by low temperature plasma treatment
160
Fabric tensor based boundary element analysis of porous solids
161
Fabric variability associated with periglacial mass-wasting at Eagle Summit, Alaska
162
Fabric, Strain and Structural Development in Three Dimensions
163
Fabricate and characterization of Ag/BaAl2O4 and its photocatalytic performance towards oxidation of gaseous toluene studied by FTIR spectroscopy
164
Fabricated and improved electrochemical properties of Li2MnSiO4 cathodes by hydrothermal reaction for Li-ion batteries
165
Fabricated nano-disk InGaN/GaN multi-quantum well of the inverse hexagonal pyramids Original Research Article
166
Fabricated or Assault Wounds - A Scientific Approach
167
Fabricating and prefabricating language: troubling trends in librarie
168
Fabricating antigen recognition and anti-bioadhesion polymeric surface via a photografting polymerization strategy
169
Fabricating Au–Ag core-shell composite films for surface-enhanced Raman scattering
170
Fabricating CdS/BiVO4 and BiVO4/CdS heterostructured film photoelectrodes for photoelectrochemical applications
171
Fabricating chiral polydiacetylene film by monolayer compression and circularly polarized ultra-violet light
172
Fabricating data: How substituting values for nondetects can ruin results, and what can be done about it
173
Fabricating electroconductive cotton textiles using graphene
174
Fabricating Elegance: Digital Architectureʹs Coming of Age
175
Fabricating fine-grained tungsten heavy alloy by spark plasma sintering of low-energy ball-milled W–2Mo–7Ni–3Fe powders
176
Fabricating high performance n-channel lateral double diffused metal–oxide–semiconductor transistors utilizing the shallow trench isolation as a salicide blocking mask of the drift region
177
Fabricating interlocking support walls, with an adjustable backshort, in a TES bolometer array for far-infrared astronomy
178
Fabricating interlocking support walls, with an adjustable backshort, in a TES bolometer array for far-infrared astronomy
179
FABRICATING MIRRORS FOR LASER VIBROMETER TESTING
180
Fabricating NIS tunnel junctions on single crystal superconducting substrate by a lithographic process
181
Fabricating non-photodefinable polymer microstructures for micro-total-analysis
182
Fabricating ordered 2D arrays of magnetic rings on patterned self-assembly monolayers via dewetting and thermal decomposition
183
Fabricating ordered porous monolayers from colloidal monolayer and multilayer
184
Fabricating PC/PAN composite membranes by vapor-induced phase separation Original Research Article
185
Fabricating Pluralism
186
Fabricating polythiophene into highly aligned microwire film by fast evaporation of its whisker solution
187
Fabricating protein nanopatterns on a single DNA molecule with Dip-pen nanolithography
188
Fabricating protein nanopatterns on a single DNA molecule with Dip-pen nanolithography
189
Fabricating protein nanopatterns on a single DNA molecule with Dip-pen nanolithography
190
Fabricating random arrays of boron doped diamond nano-disc electrodes: Towards achieving maximum Faradaic current with minimum capacitive charging
191
Fabricating red–blue-switching dual polymer electrochromic devices using room temperature ionic liquid
192
Fabricating RNA Microarrays with RNA-DNA Surface Ligation Chemistry
193
Fabricating semi-conducting polymer photonic structures via near-field scanning optical lithography
194
Fabricating solid carbon porous electrodes from powders
195
Fabricating superhydrophobic aluminum: An optimized one-step wet synthesis using fluoroalkyl silane
196
Fabricating TiC particles reinforced Fe-based composite coatings produced by GTAW multi-layers melting process
197
Fabricating tubular scaffolds with a radial pore size gradient by a spinning technique
198
Fabricating tunable nanoparticle density gradients with the contact printing based approach
199
Fabrication and Optical Characterization of Silicon Nanostructure Arrays by Laser Interference Lithography and Metal-Assisted Chemical Etching
200
Fabrication and ablation testing of 4D C/C composite at 10 MW/m2 heat flux under a plasma arc heater
201
Fabrication and absorbing property of microwave absorbers based on BaAl2Fe10O19 and poly(o-toluidine)
202
Fabrication and adhesion performance of gold conductive patterns on silicon substrate by laser sintering
203
Fabrication and adhesive properties of thin organosilane films coated on low carbon steel substrates
204
Fabrication and AFM Investigation of the TemperatureDependent Surface Morphology of Au (100) Single Crystal Ultramicroelectrodes
205
Fabrication and aggregation of thermoresponsive glucose-functionalized double hydrophilic copolymers
206
Fabrication and ammonia gas sensing of palladium/polypyrrole nanocomposite
207
Fabrication and analysis of anti-corrosion coatings on in-situ TiB2p reinforced aluminum matrix composite
208
Fabrication and analysis of buried iron silicide microstructures using a focused low energy electron beam
209
Fabrication and analysis of cylindrical resin AFM microcantilevers
210
Fabrication and analysis of cylindrical resin AFM microcantilevers
211
Fabrication and analysis of small-scale thermal energy storage with conductivity enhancement
212
Fabrication and analysis of the nanometer-sized structure of silicon by ultrahigh vacuum field emission transmission electron microscope
213
Fabrication and analysis of ZnO thin film bulk acoustic resonators
214
Fabrication and annealing analysis of three-dimensional photonic crystals
215
Fabrication and antibacterial properties of ZnO–alginate nanocomposites
216
Fabrication and anti-frosting performance of super hydrophobic coating based on modified nano-sized calcium carbonate and ordinary polyacrylate
217
Fabrication and application of a diamond-film glucose biosensor based on a H2O2 microarray electrode
218
Fabrication and application of a new DNA biosensor based on on-substrate PCR and electrochemistry
219
Fabrication and application of a new modified electrochemical sensor using nano-silica and a newly synthesized Schiff base for simultaneous determination of Cd2+, Cu2+ and Hg2+ ions in water and some foodstuff samples Original Research Article
220
Fabrication and application of a novel plant hormone sensor for the determination of methyl jasmonate based on self-assembling of phosphotungstic acid–graphene oxide nanohybrid on graphite electrode
221
Fabrication and application of a stacked carbon electrode set including a suspended mesh made of nanowires and a substrate-bound planar electrode toward for an electrochemical/biosensor platform
222
Fabrication and application of an activated carbon-coated quartz crystal sensor
223
Fabrication and application of high quality diamond-coated tools
224
Fabrication and application of highly ordered mesoporous Co3O4, NiO, and their metals Original Research Article
225
Fabrication and application of neoglycolipid arrays in a microtiter plate
226
Fabrication and application of novel hydrophilic nanomold Original Research Article
227
Fabrication and application of relaxed buffer layers
228
Fabrication and application of relaxed buffer layers
229
Fabrication and application of silicalite-1 and TS-1 hollow fibers with polyethylene imine (PEI) fibers as substrates
230
Fabrication and application of silicon nanowire transistor arrays for biomolecular detection
231
Fabrication and application of vapor grown carbon fiber
232
Fabrication and Applications of Conducting Polymer Nanotube, Nanowire, Nanohole, and Double Wall Nanotube
233
Fabrication and arc erosion behaviors of AgTiB2 contact materials
234
Fabrication and atomic force microscopy/friction force microscopy (AFM/FFM) studies of polyacrylamide–carbon nanotubes (PAM–CNTs) copolymer thin films
235
Fabrication and biocompatibility investigation of TiO2 films on the polymer substrates obtained via a novel and versatile route
236
Fabrication and biocompatibility of polypyrrole implants suitable for neural prosthetics
237
Fabrication and bioseparation studies of adsorptive membranes/felts made from electrospun cellulose acetate nanofibers
238
Fabrication and brazeability of a three-layer 4343/3003/4343 aluminum clad sheet by rolling
239
Fabrication and buckling behavior of polycrystalline palladium, cobalt, and rhodium nanostructures
240
Fabrication and calibration of a gas sensor based on chemically vapor deposited WO3 films on silicon substrates: Application to H2 sensing
241
Fabrication and capacitance of Ni2+–Fe3+ LDHs/MnO2 layered nanocomposite via an exfoliation/reassembling process
242
Fabrication and carbon monoxide sensing characteristics of mesostructured carbon gas sensors
243
Fabrication and catalytic activity of ultra-long V2O5 nanowires on the thermal decomposition of ammonium perchlorate
244
Fabrication and catalytic properties of novel urchin-like Co3O4
245
Fabrication and catalytic properties of Pd and Ce decorated carbon nanotube-TiO2 composite catalysts for low-temperature CO oxidation
246
Fabrication and catalytic property of an Ag@poly(3,4-ethylenedioxythiophene) yolk/shell structure
247
Fabrication and cellular biocompatibility of porous carbonated biphasic calcium phosphate ceramics with a nanostructure
248
Fabrication and cellular compatibility of aligned chitosan–PCL fibers for nerve tissue regeneration
249
Fabrication and characterisation of (Ba,Sr)TiO3 thin films by sol–gel technique through organic precursor route
250
Fabrication and characterisation of a new sensing device based on hydrocarbon groups (CHx) coated porous silicon
251
Fabrication and characterisation of Al–7Si–0.35Mg/fly ash metal matrix composites processed by different stir casting routes
252
Fabrication and characterisation of barium strontium titanate thick film device structures for microwave applications
253
Fabrication and characterisation of cellular alumina articles produced via radiation curable dispersions
254
Fabrication and characterisation of chitosan nanoparticles/plasticised-starch composites
255
Fabrication and characterisation of Cr and Co doped Bi1.5Zn0.92Nb1.5O6.92 pyrochlores
256
Fabrication and characterisation of CuInSe2/Si(1 0 0) thin films by the stacked elemental layer (SEL) technique
257
Fabrication and characterisation of high performance polypyrrole modified microarray sensor for ascorbic acid determination Original Research Article
258
Fabrication and characterisation of La0.8Sr0.2MnO3/metal interfaces for application in SOFCs
259
Fabrication and characterisation of microporous activated carbon-based pre-concentrators for benzene vapours
260
Fabrication and characterisation of Ni-coated carbon fibre-reinforced alumina ceramic matrix composites using electrophoretic deposition Original Research Article
261
Fabrication and characterisation of NiO/ZnO structures
262
Fabrication and characterisation of parallel multijunction thin film silicon solar cells
263
Fabrication and characterisation of polymer thin-films derived from cineole using radio frequency plasma polymerisation
264
Fabrication and characterisation of porous silicon nitride ceramics using Yb2O3 as sintering additive
265
Fabrication and characterisation of protein fibril–elastomer composites
266
Fabrication and characterisation of p-type GaN metal-semiconductor-metal ultraviolet photoconductors grown by MBE
267
Fabrication and characterisation of p-type GaN metal-semiconductor-metal ultraviolet photoconductors grown by MBE
268
Fabrication and characterisation of pure magnesium-30 vol.% SiCP particle composite
269
Fabrication and characterisation of pure magnesium-30 vol.% SiCP particle composite
270
Fabrication and characterisation of self-assembled monolayers of N-[3-(trimethoxysilyl)propyl]diethylenetriamine on silica particles
271
Fabrication and characterisation of silicon carbide/superalloy interfaces
272
Fabrication and characterisation of U0.85Am0.15O2−x discs for MARIOS irradiation program
273
Fabrication and characterisation of ultra sharp silicon field emitters
274
Fabrication and characterisation of ultra sharp silicon field emitters
275
Fabrication and characterisation of ultra-thin tungsten–carbon (W/C) and platinum–carbon (Pt/C) multilayers for X-ray mirrors
276
Fabrication and characterisation of α-chitin nanofibers and highly transparent chitin films by pulsed ultrasonication
277
Fabrication and characterisations of n-CdS/p-PbS heterojunction solar cells using microwave-assisted chemical bath deposition
278
Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting
279
Fabrication and characteristic of non-oxide fiber tow reinforced silicon nitride matrix composites by low temperature CVI process
280
Fabrication and Characteristic Responses of Integrated Microelectrodes in Polymer Channel Chip
281
Fabrication and characteristics of a composite cathode of sulfonated polyaniline and Ramsdellite–MnO2 for a new rechargeable lithium polymer battery
282
Fabrication and characteristics of a surface acoustic wave UV sensor based on ZnO thin films grown on a polycrystalline 3C–SiC buffer layer
283
Fabrication and characteristics of anode as an electrolyte reservoir for molten carbonate fuel cell
284
Fabrication and characteristics of anode-supported flat-tube solid oxide fuel cell
285
Fabrication and characteristics of Ba(Zr0.1,Ti0.9)O3 thin films on glass substrate Original Research Article
286
Fabrication and characteristics of bulk semi-insulating 6H-SiC semiconductor detector for an α radiation at room temperature
287
Fabrication and characteristics of bulk semi-insulating 6H-SiC semiconductor detector for an α radiation at room temperature
288
Fabrication and characteristics of CO2-gas sensor using Li2CO3–Li3PO4–Al2O3 electrolyte and LiMn2O4 reference electrode
289
Fabrication and characteristics of composite containing HCl-doped polyaniline and Ni nanoparticles
290
Fabrication and characteristics of cube-post microreactors for methanol steam reforming
291
Fabrication and characteristics of Fe3O4-polymer composite particles by hybridization
292
Fabrication and characteristics of GaP-AlGaP tapered waveguide semiconductor Raman amplifiers
293
Fabrication and characteristics of high-speed implant-confined index-guided lateral-current 850-nm vertical cavity surface-emitting lasers
294
Fabrication and characteristics of impact type ultrasonic motor
295
Fabrication and characteristics of in situ Al12W particles reinforced aluminum matrix composites by reaction sintering
296
Fabrication and characteristics of melt-spun Al ribbons reinforced with nano/micro-BN phases
297
Fabrication and characteristics of novel microelectronic structures fabricated by plasma-based techniques
298
Fabrication and characteristics of photodiode based on ZnO nanowire arrays and spray-coated regioregular P3HT layers
299
Fabrication and characteristics of planar-type methane reformer using ceria-based oxygen permeable membrane
300
Fabrication and characteristics of plasma facing SiC/C functionally graded composite material
301
Fabrication and characteristics of porous NiTi shape memory alloy synthesized by microwave sintering
302
Fabrication and characteristics of Schottky diode based on composite organic semiconductors
303
Fabrication and characteristics of Schottky diodes based on regioregular poly(3-hexylthiophene)/Al junction
304
Fabrication and characteristics of self-assembly nano-polystyrene films by laser induced CVD
305
Fabrication and characteristics of SiOx films by plasma chemical vapor deposition of tetramethylorthosilicate
306
Fabrication and characteristics of ta-C biomaterial coatings on Ti–6Al–4V using metal plasma immersion ion implantation and deposition
307
Fabrication and characteristics of thermal crosslinking polyurethane integrated double-channel electro-optic modulator
308
Fabrication and characteristics of TiB2/Al2O3 core/shell particles by hybridization
309
Fabrication and characteristics of transparent conducting In2O3-ZnO thin films by ultrasonic spray pyrolysis
310
Fabrication and characteristics of transparent conducting In2O3–ZnO thin films by ultrasonic spray pyrolysis
311
Fabrication and characteristics of ZnO thin films with an Al/Si (1 0 0) substrates
312
Fabrication and characterization for single crystal substrates of YBa2Cu3O7 δ and related materials
313
Fabrication and characterization for single crystal substrates of YBa2Cu3O7 δ and related materials
314
Fabrication and characterization of (Pb(Mg1/3Nb2/3)O3, Pb(Yb1/2Nb1/2)O3, PbTiO3) ternary system ceramics
315
Fabrication and characterization of (Pd/Ag)–La0.2Sr0.8CoO3−δ composite membrane on porous asymmetric substrates
316
Fabrication and characterization of (U, Am)O2−x transmutation targets
317
Fabrication and characterization of ‘self-binding’ nanocrystalline SnO2 powder based thick film ethanol sensor
318
Fabrication and characterization of 2.5D and 3D SiCf/SiC composites
319
Fabrication and characterization of 3-dimensional PLGA nanofiber/microfiber composite scaffolds
320
Fabrication and characterization of 45S5 bioglass reinforced macroporous calcium silicate bioceramics
321
Fabrication and characterization of 4-tricyanovinyl-N,N-diethylaniline/p-silicon hybrid organic–inorganic solar cells
322
Fabrication and characterization of a boehmite nanoparticle impregnated electrospun fiber membrane for removal of metal ions
323
Fabrication and characterization of a carbon electrode coated with cation-exchange polymer for the membrane capacitive deionization applications
324
Fabrication and characterization of a carbon fibre reinforced carbon–silicon carbide–titanium silicon carbide hybrid matrix composite
325
Fabrication and characterization of a cathode-support solid oxide fuel cell by tape casting and lamination
326
Fabrication and characterization of a chemically oxidized-nanostructured porous silicon based biosensor implementing orienting protein A
327
Fabrication and characterization of a co-fired La0.6Sr0.4Co0.2Fe0.8O3−δ cathode-supported Ce0.9Gd0.1O1.95 thin-film for IT-SOFCs
328
Fabrication and characterization of a composite ZnO semiconductor as electron transporting layer in dye-sensitized solar cells
329
Fabrication and Characterization of a Conductive Proton Exchange Membrane Based on Sulfonated Polystyrenedivinylbenzene Resin-Polyethylene (SPSDR-PE): Application in Direct Methanol Fuel Cells
330
Fabrication and characterization of a cotton candy like surface with superhydrophobicity
331
Fabrication and characterization of a dual layer ceramic interconnect on a porous NiO-YSZ anode support
332
Fabrication and characterization of a flat-plate static-concentrator photovoltaic module
333
Fabrication and characterization of a fluorescent sensor based on Rh 6G-functionlized silica nanoparticles for nitrite ion detection
334
Fabrication and characterization of a highly sensitive surface plasmon resonance based fiber optic pH sensor utilizing high index layer and smart hydrogel
335
Fabrication and characterization of a hydroxyapatite nanopowder by ultrasonic spray pyrolysis with salt-assisted decomposition
336
Fabrication and characterization of a laterally coupled vertical triple quantum dot device
337
Fabrication and characterization of a LiCoO2 battery–supercapacitor combination for a high-pulse power system
338
Fabrication and characterization of a miniaturized planar voltammetric sensor array for use in an electronic tongue
339
Fabrication and characterization of a Mo/Si multilayer monochromator with a narrow spectral bandwidth in the xuv domain
340
Fabrication and characterization of a Mo/Si multilayer monochromator with a narrow spectral bandwidth in the xuv domain
341
Fabrication and characterization of a multi-stage electroosmotic pump for liquid delivery
342
Fabrication and characterization of a nanogap edge emitter with a silicon-on-insulator wafer
343
Fabrication and characterization of a nanoporous NiO film with high specific energy and power via an electrochemical dealloying approach
344
Fabrication and characterization of a Ni-YSZ anode support using high-frequency induction heated sintering (HFIHS)
345
Fabrication and characterization of a novel Luggin capillary reference electrode for use in solid state electrolytes
346
Fabrication and characterization of a novel microparticle with gyrus-patterned surface and growth factor delivery for cartilage tissue engineering
347
Fabrication and characterization of a novel TiO2 nanoparticle self-assembly membrane with improved fouling resistance
348
Fabrication and characterization of a novel wafer-level micro-electrode system for dielectrophoresis manipulation
349
Fabrication and characterization of a PbTe quantum dots multilayer structure
350
Fabrication and characterization of a polysulfone-graphene oxide nanocomposite membrane for arsenate rejection from water
351
Fabrication and characterization of a porous carbon electrode for desalination of brackish water Original Research Article
352
Fabrication and characterization of a porous titanium dioxide film with sub-micropores
353
Fabrication and characterization of a PTFE-reinforced integral composite membrane for self-humidifying PEMFC
354
Fabrication and characterization of a recombinant fibronectin/cadherin bio-inspired ceramic surface and its influence on adhesion and ossification in vitro
355
Fabrication and characterization of a rigid magnetic matrix for protein adsorption
356
Fabrication and characterization of a smart drug delivery system: microsphere in hydrogel
357
Fabrication and characterization of a smart epitaxial piezoelectric micromachined ultrasonic transducer
358
Fabrication and characterization of a sponge-like asymmetric chitosan membrane as a wound dressing
359
Fabrication and characterization of a superconducting multiplexer using laser ablated YBCO thin films
360
Fabrication and characterization of a surface plasmon resonance based fiber optic sensor using gel entrapment technique for the detection of low glucose concentration
361
Fabrication and characterization of a surface plasmon resonance based fiber optic urea sensor for biomedical applications
362
Fabrication and characterization of a surface plasmon resonance based fiber-optic sensor for bittering component—Naringin
363
Fabrication and characterization of a surface-patterned thin film composite membrane
364
Fabrication and characterization of a triple functionalization of graphene oxide with Fe3O4, folic acid and doxorubicin as dual-targeted drug nanocarrier
365
Fabrication and characterization of a vertical lamination micromixer for mid-IR spectroscopy
366
Fabrication and characterization of a vertical pillar structure including a self-assembled quantum dot and a quantum well
367
Fabrication and characterization of a YSZ/YDC composite electrolyte by a sol–gel coating method
368
Fabrication and characterization of a zirconia/multi-walled carbon nanotube mesoporous composite
369
Fabrication and characterization of a ZnO X-ray sensor using a high-resistivity ZnO single crystal grown by the hydrothermal method
370
Fabrication and characterization of a ZnO X-ray sensor using a high-resistivity ZnO single crystal grown by the hydrothermal method
371
Fabrication and characterization of a α,β,γ,δ-Tetrakis(1-methylpyridinium-4-yl)porphine/silica nanocomposite thin-layer membrane for detection of ppb-level heavy metal ions Original Research Article
372
Fabrication and characterization of advanced probes for magnetic force microscopy
373
Fabrication and characterization of Ag-SiO2 composite hollow nanospheres
374
Fabrication and characterization of Al/SiCp composites by CAR process
375
Fabrication and characterization of Al356/SiCp semisolid composites by injecting SiCp containing composite powders
376
Fabrication and characterization of aligned nanofibrous PLGA/Collagen blends as bone tissue scaffolds
377
Fabrication and characterization of all-perovskite oxide p–n junctions based on La1−xSrxMnO3 and Nb-1wt% doped SrTiO3
378
Fabrication and characterization of Al-matrix composites reinforced with amino-functionalized carbon nanotubes
379
Fabrication and characterization of aluminum nanostructures and nanoparticles obtained using femtosecond ablation technique
380
Fabrication and characterization of aluminum nitride polymer matrix composites with high thermal conductivity and low dielectric constant for electronic packaging
381
Fabrication and characterization of aluminum-doped zinc oxide Schottky diodes on n-GaN
382
Fabrication and characterization of americium, neptunium and curium bearing MOX fuels obtained by powder metallurgy process
383
Fabrication and characterization of amorphous In–Zn–O/SiOx/ n-Si heterojunction solar cells
384
Fabrication and characterization of amorphous SiBCN powders
385
Fabrication and characterization of an evanescent wave fiber optic sensor for air pollution control
386
Fabrication and characterization of an Li---Mn---O thin-film cathode for rechargeable lithium microbatteries
387
Fabrication and characterization of an optical fiber pH sensor using sol–gel deposited TiO2 film doped with organic dyes
388
Fabrication and characterization of anatase TiO2 thin film on glass substrate grown by pulsed laser deposition
389
Fabrication and characterization of anisotropic dielectrics for low-loss microwave applications
390
Fabrication and characterization of anode support low-temperature solid oxide fuel cell based on the samaria-doped ceria electrolyte
391
Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells
392
Fabrication and characterization of anode-supported single chamber solid oxide fuel cell based on La0.6Sr0.4Co0.2Fe0.8O3−δ–Ce0.9Gd0.1O1.95 composite cathode
393
Fabrication and characterization of anorthite-based ceramic using mineral raw materials
394
Fabrication and characterization of antibacterial PVDF hollow fibre membrane by doping Ag-loaded zeolites
395
Fabrication and characterization of APT specimens from high dose heavy ion irradiated materials
396
Fabrication and characterization of APT specimens from high dose heavy ion irradiated materials
397
Fabrication and characterization of Au/n-Si photodiode with lithium as back-surface-field
398
Fabrication and characterization of Au/SiO2 nanocomposite films
399
Fabrication and characterization of Au/SiO2 nanocomposite films grown by radio-frequency cosputtering
400
Fabrication and characterization of Au-nanoparticle/ W-nanodendrite structures on Al2O3 substrate
401
Fabrication and characterization of B2O3–Al2O3–Na2O glass system for transparent dielectric layer
402
Fabrication and characterization of Ba(Zr0.84Y0.15Cu0.01)O3−δ electrolyte-based protonic ceramic fuel cells
403
Fabrication and characterization of bioactive and antibacterial composites for dental applications
404
Fabrication and characterization of bioactive calcium silicate microspheres for drug delivery
405
Fabrication and characterization of bioactive glass (45S5)/titania biocomposites
406
Fabrication and characterization of bioactive glass/hydroxyapatite nanocomposite foam by gelcasting method
407
Fabrication and characterization of bioactive glass-ceramic using soda–lime–silica waste glass
408
Fabrication and characterization of bioactive silk fibroin/wollastonite composite scaffolds
409
Fabrication and characterization of bioactive wollastonite/PHBV composite scaffolds
410
Fabrication and characterization of bioactive β-Ca2SiO4/PHBV composite scaffolds
411
Fabrication and characterization of biodegradable composites based on microfibrillated cellulose and polyvinyl alcohol
412
Fabrication and characterization of biomimetic ceramic/polymer composite materials for dental restoration
413
Fabrication and characterization of biomimetic collagen–apatite scaffolds with tunable structures for bone tissue engineering
414
Fabrication and characterization of biomorphic 45S5 bioglass scaffold from sugarcane
415
Fabrication and characterization of bismuth oxide–holmia nanofibers and nanoceramics
416
Fabrication and characterization of block copolymer micelle multilayer films prepared using dip-, spin- and spray-assisted layer-by-layer assembly deposition
417
Fabrication and Characterization of Bolus Material Using Propylene Glycol for Radiation Therapy
418
Fabrication and characterization of boron nitride bulk foam from borazine
419
Fabrication and characterization of BTDA-TDI/MDI (P84) co-polyimide membranes for the pervaporation dehydration of isopropanol
420
Fabrication and characterization of bulk glassy Co40Fe22Ta8B30 alloy with high thermal stability and excellent soft magnetic properties Original Research Article
421
Fabrication and characterization of C/SiC composites with large thickness, high density and near-stoichiometric matrix by heaterless chemical vapor infiltration
422
Fabrication and characterization of C60/tetrathiafulvalene solar cells Original Research Article
423
Fabrication and characterization of carbon nanoparticles for polymer based vapor sensors
424
Fabrication and characterization of carbon nanotube array electrodes with gold nanoparticle tips
425
Fabrication and characterization of carbon nanotube arrays using sandwich catalyst stacks Original Research Article
426
Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes
427
Fabrication and characterization of CdS nanotube arrays in porous anodic aluminum oxide templates
428
Fabrication and characterization of CdxZn(1−x)S nano particles
429
Fabrication and characterization of cellulose nanofiber based thin-film nanofibrous composite membranes
430
Fabrication and characterization of ceramic coatings with alumina–silica sol-incorporated α-alumina powder coated on woven quartz fiber fabrics
431
Fabrication and characterization of ceria-based buffer layers for solid oxide fuel cells
432
Fabrication and characterization of cerium-doped barium titanate inverse opal by sol–gel method
433
Fabrication and characterization of cerium-doped titania inverse opal by sol–gel method
434
Fabrication and characterization of cesium telluride photocathodes: A promising electron source for the Los Alamos Advanced FEL
435
Fabrication and characterization of chemically crosslinked keratin films
436
Fabrication and characterization of chemically sensitive needle tips with aluminum oxide nanopores for pH indication
437
Fabrication and characterization of chitosan/gelatin porous scaffolds with predefined internal microstructures
438
Fabrication and characterization of chondroitin sulfate-modified chitosan membranes for biomedical applications Original Research Article
439
Fabrication and characterization of cobalt ferrite (CoFe2O4) nanofibers by electrospinning
440
Fabrication and characterization of components for cube shaped micro tubular SOFC bundle
441
Fabrication and characterization of composite electrolyte for intermediate-temperature SOFC
442
Fabrication and characterization of composite Langmuir–Schaefer films of poly(ortho-anisidine) conducting polymer and tri-(2,4-di-t-amylphenoxy)-(8-quinolinolyl) copper phthalocyanine
443
Fabrication and characterization of composite sol–gel coatings on porous ceramic substrate
444
Fabrication and characterization of conductive polypyrrole thin film prepared by in situ vapor-phase polymerization
445
Fabrication and characterization of copper nanoparticle thin-films and the electrocatalytic behavior
446
Fabrication and characterization of copper nanoparticle thin-films and the electrocatalytic behavior Original Research Article
447
Fabrication and characterization of copper oxide (CuO)–gold (Au)–titania (TiO2) and copper oxide (CuO)–gold (Au)–indium tin oxide (ITO) nanowire heterostructures
448
Fabrication and characterization of cordierite-bonded porous SiC ceramics
449
Fabrication and characterization of core-shell photonic crystals via a dipping process
450
Fabrication and characterization of Coriolis mass flowmeter made from Ti-based glassy tubes
451
Fabrication and Characterization of Covalently Functionalized poly Caprolactone Scaffold for Bone Tissue Engineering Application
452
Fabrication and characterization of CuAlO2 transparent thin films prepared by spray technique
453
Fabrication and characterization of cube textured Ni substrate for YBCO coated conductors
454
Fabrication and characterization of Cu–Ni–YSZ SOFC anodes for direct use of methane via Cu-electroplating
455
Fabrication and characterization of CuO-core/TiO2-shell one-dimensional nanostructures
456
Fabrication and characterization of cuprous oxide: fullerene solar cells
457
Fabrication and characterization of DBM/p-Si heterojunction solar cell
458
Fabrication and characterization of dense YBa2Cu3O7−y superconducting wires by extrusion technique
459
Fabrication and characterization of dense YBa2Cu3O7−y superconducting wires by extrusion technique
460
Fabrication and characterization of diamond/copper composites for thermal management substrate applications
461
Fabrication and characterization of diamond/copper composites for thermal management substrate applications
462
Fabrication and characterization of diamond-like carbon thin films by pulsed laser deposition
463
Fabrication and characterization of dipalmitoylphosphatidylcholine-attracting elastomeric material for joint replacements
464
Fabrication and characterization of disposable sensors and biosensors for detection of formaldehyde
465
Fabrication and characterization of disposable type lactate oxidase sensors for dairy products and clinical analysis
466
Fabrication and characterization of DNA–thionine–carbon nanotube nanocomposites
467
Fabrication and characterization of driver-fuel particles, designed-to-fail fuel particles, and fuel compacts for the US AGR-3/4 irradiation test
468
Fabrication and characterization of drug particles produced by electrospraying into reduced pressure
469
Fabrication and characterization of DTBP-crosslinked chitosan scaffolds for skin tissue engineering
470
Fabrication and characterization of dual phase magnesia–zirconia ceramics doped with plutonia
471
Fabrication and characterization of easily sintered and stable anode-supported proton-conducting membranes
472
Fabrication and characterization of elastomeric scaffolds comprised of a citric acid-based polyester/hydroxyapatite microcomposite
473
Fabrication and characterization of electro-codeposited Ni/Zr-silicate composite coating
474
Fabrication and characterization of electroosmotic micropumps
475
Fabrication and characterization of electro-phosphorescent organic light-emitting devices with a ferromagnetic cathode for observation of spin injection effect
476
Fabrication and characterization of electrospun carbon nanotubes/titanium dioxide nanofibers used in anodes of dye-sensitized solar cells
477
Fabrication and characterization of electrospun carbon nanotubes/titanium dioxide nanofibers used in anodes of dye-sensitized solar cells
478
Fabrication and characterization of electrospun orthorhombic InVO4 nanofibers
479
Fabrication and characterization of electrospun osteon mimicking scaffolds for bone tissue engineering
480
Fabrication and characterization of energy storing supercapacitor devices using coconut shell based activated charcoal electrode
481
Fabrication and characterization of epitaxial Ba0.7Sr0.3TiO3 thin films for optical waveguide applications
482
Fabrication and characterization of epitaxial films of ionic materials
483
Fabrication and characterization of epitaxial Sr0.6Ba0.4Nb2O6/La0.7Sr0.3CoO3 heterostructures
484
Fabrication and characterization of Er3+-doped GeO2–PbO and GeO2–PbO–Bi2O3 glass fibers
485
Fabrication and characterization of eutectic gold–silicon (Au–Si) nanowires
486
Fabrication and characterization of facing-target reactive sputtered polycrystalline TiO2 films
487
Fabrication and Characterization of Fast Ignition Targets
488
Fabrication and characterization of Fe1.90Ti0.10O3 gas sensitive resistors for carbon monoxide
489
Fabrication and characterization of Fe3+-doped titania semiconductor electrodes with p–n homojunction devices
490
Fabrication and characterization of Fe3O4@APTES@PAMAM-Ag highly active and recyclable magnetic nanocatalyst: Catalytic reduction of 4-nitrophenol
491
Fabrication and characterization of Fe3O4-based Cu nanostructured electrode for Li-ion battery
492
Fabrication and characterization of Fe–Ni alloy/nickel ferrite composite nanofibers by electrospinning and partial reduction
493
Fabrication and characterization of ferrimagnetic bioactive glass-ceramic containing BaFe12O19
494
Fabrication and characterization of few-layer graphene Original Research Article
495
Fabrication and characterization of field effect transistors of layered structure consisting of TMTSF and TCNQ
496
Fabrication and characterization of field effect transistors using donor and acceptor stacked layers
497
Fabrication and characterization of field-effect transistor device with C2v isomer of Pr@C82
498
Fabrication and characterization of filled hydrogel particles based on sequential segregative and aggregative biopolymer phase separation
499
Fabrication and characterization of fine-grained barium strontium titanate ceramics by the heterogeneous precipitation method
500
Fabrication and characterization of flexible and high capacitance supercapacitors based on MnO2/CNT/papers
501
Fabrication and characterization of forward osmosis hollow fiber membranes with antifouling NF-like selective layer
502
Fabrication and characterization of fullerene/porphyrin bulk heterojunction solar cells Original Research Article
503
Fabrication and characterization of fullerene-based solar cells containing phthalocyanine and naphthalocyanine dimers
504
Fabrication and characterization of fullerene–Nafion composite membranes
505
Fabrication and characterization of fully ceramic microencapsulated fuels
506
Fabrication and characterization of fully dense Si–C–N ceramics from a poly(ureamethylvinyl)silazane precursor
507
Fabrication and characterization of functionally graded synthetic graphite/phenolic nanocomposites
508
Fabrication and characterization of functionally-graded LSCF cathodes by tape casting
509
Fabrication and characterization of GaAs MIS devices with N-rich PECVD SixNy dielectric
510
Fabrication and characterization of GaInP/GaAs triple barrier resonant tunneling diodes grown by MOCVD
511
Fabrication and characterization of GaN/amorphous Ga2O3 nanocables through thermal oxidation
512
Fabrication and characterization of GaN/InGaN/AlGaN double heterostructure LEDs and their application in luminescence conversion LEDs
513
Fabrication and characterization of GaN/InGaN/AlGaN double heterostructure LEDs and their application in luminescence conversion LEDs
514
Fabrication and characterization of GDC electrolyte/electrode integral SOFC with BaO/Ni-GDC anode
515
Fabrication and characterization of Ge nanocrystalline growth by ion implantation in SiO2 matrix
516
Fabrication and characterization of glass–ceramics materials developed from steel slag waste
517
Fabrication and Characterization of Gliclazide Nanocrystals
518
Fabrication and characterization of gold nanohole electrode arrays
519
Fabrication and characterization of gold/acrylic polymer nanocomposites
520
Fabrication and characterization of graded impedance impactors for gas gun experiments from hot-pressed magnesium and polyethylene powders
521
Fabrication and characterization of graded impedance impactors for gas gun experiments from tape cast metal powders
522
Fabrication and characterization of grain-oriented bismuth vanadate ceramics
523
Fabrication and characterization of graphene oxide/zinc oxide nanorods hybrid
524
Fabrication and characterization of graphene-reinforced waterborne polyurethane nanocomposite coatings by the sol–gel method
525
Fabrication and characterization of gum ghatti-polymethacrylic acid based electrically conductive hydrogels
526
Fabrication and characterization of hardened bodies from Japanese volcanic ash using geopolymerization
527
Fabrication and characterization of heparin functionalized membrane-mimetic assemblies
528
Fabrication and Characterization of Heparin/Collagen Sponge for in Vitro Differentiation of Wharton’s Jelly-Derived Mesenchymal Stem Cells into Hepatocytes
529
Fabrication and characterization of hermetic solid oxide fuel cells without sealant
530
Fabrication and characterization of heteroepitaxial bilayers of La–Ca–Mn–O/Y–Ba–Cu–O
531
Fabrication and characterization of heteropolyacid (H3PW12O40)/directly polymerized sulfonated poly(arylene ether sulfone) copolymer composite membranes for higher temperature fuel cell applications
532
Fabrication and characterization of hexagonal boron nitride powder by spray drying and calcining–nitriding technology
533
Fabrication and characterization of hexahistidine-tagged protein functionalized multi-walled carbon nanotubes for selective solid-phase extraction of Cu2+ and Ni2+
534
Fabrication and characterization of hierarchically organized nanoparticle-reinforced nanofibrous composite scaffolds
535
Fabrication and characterization of high curie temperature BiSc1/2Fe1/2O3–PbTiO3 piezoelectric films by a sol–gel process
536
Fabrication and characterization of high solid content Co0.8Ni0.2Fe2O4/PVP composite nanofibers by direct-dispersed electrospinning
537
Fabrication and characterization of high strength Nylon-6/Si3N4 polymer nanocomposite fibers
538
Fabrication and characterization of high-current-density carbon-nanotube cold cathodes
539
Fabrication and characterization of high-density arrays of P3HT nanopillars on ITO/glass substrates
540
Fabrication and characterization of highly ordered phosphorus-doped ZnO nanocombs Original Research Article
541
Fabrication and characterization of highly ordered zirconia nanowire arrays by sol–gel template method
542
Fabrication and characterization of highly porous mullite ceramics
543
Fabrication and characterization of high-resolution AFM tips with high-quality double-wall carbon nanotubes
544
Fabrication and characterization of high-T/sub c/ SQUID magnetometer with damping resistance
545
Fabrication and characterization of hollow cuprous sulfide (Cu2−xS) microspheres by a simple template-free route
546
Fabrication and characterization of hollow spherical boron nitride powders
547
Fabrication and characterization of humidity sensor based on (Li2MoO4)x(CaMoO4)1−x system
548
Fabrication and characterization of hybrid micro/nano-structured hydrophilic titania coatings deposited by suspension flame spraying
549
Fabrication and characterization of hybrid solar cells based on copper phthalocyanine/porous silicon
550
Fabrication and characterization of hybrid structured Al alloy matrix composites reinforced by high volume fraction of B4C particles
551
Fabrication and characterization of hydrophilic poly(lactic-co-glycolic acid)/poly(vinyl alcohol) blend cell scaffolds by melt-molding particulate-leaching method
552
Fabrication and characterization of III–V semiconductor superlattices with sinusoidal compositional modulation
553
Fabrication and characterization of improved PFSA/ePTFE composite polymer electrolyte membranes
554
Fabrication and characterization of indium sulfide thin films deposited on SAMs modified substrates surfaces by chemical bath deposition
555
Fabrication and characterization of injection molded poly (ε-caprolactone) and poly (ε-caprolactone)/hydroxyapatite scaffolds for tissue engineering
556
Fabrication and characterization of inkjet-printed carbon nanotube electrode patterns on paper Original Research Article
557
Fabrication and characterization of InP nanocrystals embedded in SiO2 matrix by RF magnetron co-sputtering
558
Fabrication and characterization of in-situ TiAl matrix composite with controlled microlaminated architecture based on SiC/Al and Ti system
559
Fabrication and characterization of intergrown Bi4Ti3O12-based thin films using a metal-organic precursor solution
560
Fabrication and characterization of iron oxide nanoparticles reinforced vinyl-ester resin nanocomposites
561
Fabrication and characterization of ITO thin films on heat-resistant transparent flexible clay films
562
Fabrication and characterization of kidney bean (Phaseolus vulgaris L.) protein isolate–chitosan composite films at acidic pH
563
Fabrication and characterization of La-doped HfO2 gate dielectrics by metal-organic chemical vapor deposition
564
Fabrication and characterization of large metallic nanodots arrays for organic thin film solar cells using anodic aluminum oxide templates
565
Fabrication and characterization of large size 6LiF/CaF2:Eu eutectic composites with the ordered lamellar structure
566
Fabrication and characterization of large size 6LiF/CaF2:Eu eutectic composites with the ordered lamellar structure
567
Fabrication and characterization of Li0.5Fe2.5O4 octahedrons via a TEA-assisted route
568
Fabrication and characterization of Li1+x−yNb1−x−3yTix+4yO3 substrates using aqueous tape casting process
569
Fabrication and characterization of Li2TiO3 core–shell pebbles with enhanced lithium density
570
Fabrication and characterization of Li3TaO4 ceramic pebbles by wet process
571
Fabrication and characterization of Li4SiO4 ceramic pebbles by wet method
572
Fabrication and characterization of Li4SiO4 pebbles by melt spraying method
573
Fabrication and characterization of low aberration micrometer-sized electron lenses
574
Fabrication and characterization of low aberration micrometer-sized electron lenses
575
Fabrication and characterization of low cost tubular mineral-based ceramic membranes for micro-filtration from natural zeolite
576
Fabrication and characterization of low temperature (<450 °C) grown p-Ge/n-Si photodetectors for silicon based photonics
577
Fabrication and characterization of low-temperature SOFC stack based on GDC electrolyte membrane
578
Fabrication and characterization of luminescent self-assembled thin films of europium complex
579
Fabrication and characterization of machinable Si3N4/h-BN functionally graded materials
580
Fabrication and characterization of macroporous flyash ceramic pellets
581
Fabrication and characterization of magnesium–fluorapatite nanocomposite for biomedical applications
582
Fabrication and characterization of magnetic cobalt ferrite/polyacrylonitrile and cobalt ferrite/carbon nanofibers by electrospinning Original Research Article
583
Fabrication and characterization of magnetic Fe3O4–CNT composites Original Research Article
584
Fabrication and characterization of magnetic nanoporous zeolite templated carbon Original Research Article
585
Fabrication and characterization of magnetron sputtered arsenic doped p-type ZnO epitaxial thin films
586
Fabrication and characterization of Meldolaʹs blue/zinc oxide hybrid electrodes for efficient detection of the reduced form of nicotinamide adenine dinucleotide at low potential Original Research Article
587
Fabrication and characterization of mesoporous TiO2/polypyrrole-based nanocomposite for electrorheological fluid
588
Fabrication and Characterization of Mesostructured Silica, HUM-1, and Its Ordered Mesoporous Carbon Replica
589
Fabrication and characterization of metal and semiconductor SmS thin films by rf/dc dual magnetron sputtering
590
Fabrication and characterization of metallic glasses with a specific microstructure for micro-electro-mechanical system applications
591
Fabrication and characterization of metalrGaN contacts
592
Fabrication and characterization of metal-supported solid oxide fuel cells
593
Fabrication and characterization of Mg-doped pencil-shaped ZnO microprisms
594
Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti–6Al–4V surfaces
595
Fabrication and characterization of micro tubular SOFCs for operation in the intermediate temperature
596
Fabrication and characterization of micro-arc oxidized fluoride containing titania films on Cp Ti
597
Fabrication and characterization of micro-dimple array on Al2O3 surfaces by using a micro-tooling
598
Fabrication and characterization of microelectromechanical systems-based gas chromatography column with embedded micro-posts for separation of environmental carcinogens
599
Fabrication and characterization of microencapsulated n-octadecane with different crosslinked methylmethacrylate-based polymer shells
600
Fabrication and characterization of microfluidic liver-on-a-chip using microsomal enzymes
601
Fabrication and characterization of micro-gas sensor for nitrogen oxides gas detection
602
Fabrication and characterization of microgel-impregnated, thermosensitive PNIPAAm hydrogels
603
Fabrication and characterization of microinductors for distributed power converters
604
Fabrication and characterization of microstructured and pH sensitive interpenetrating networks hydrogel films and application in drug delivery field
605
Fabrication and characterization of microtubular and flattened ribbed SOFCs prepared by the multi-dip coating and co-firing
606
Fabrication and characterization of micro-tubular cathode-supported SOFC for intermediate temperature operation
607
Fabrication and characterization of mini alumina ceramic turbine rotor using a tailored gelcasting process
608
Fabrication and characterization of minor actinides bearing fuels obtained by conventional powder metallurgy process
609
Fabrication and characterization of Mn doped SnO2 thin films
610
Fabrication and characterization of Mn-doped CuO thin films by the SILAR method
611
Fabrication and characterization of monodisperse PLGA–alginate core–shell microspheres with monodisperse size and homogeneous shells for controlled drug release
612
Fabrication and characterization of multi phase ceramic composites based on zircon–alumina–magnesia mixtures
613
Fabrication and characterization of multi-filament copper matrix–polyethylene fibres composite wire
614
Fabrication and characterization of multilayered nanoporous platinum films deposited by electroplating and nonionic surfactant molds
615
Fabrication and characterization of multi-walled carbon nanotube incorporated ferromagnetic nanowires with self-formed anti-oxidation layers
616
Fabrication and characterization of multi-walled carbon nanotubes/polymer blend membranes
617
Fabrication and characterization of multi-walled carbon nanotubes-based ink
618
Fabrication and characterization of nano TiO2 thin films at low temperature
619
Fabrication and characterization of nano/amorphous dual-phase FINEMET microwires
620
Fabrication and Characterization of Nanocapsules of PLGA Containing BSA Using Electrospray Technique
621
Fabrication and characterization of nano-composite scaffold of PLLA/silane modified hydroxyapatite
622
Fabrication and characterization of nanocrystalline cobalt oxide thin films
623
Fabrication and characterization of nanocrystalline Mg-substituted fluorapatite by high energy ball milling
624
Fabrication and characterization of nanofibrous tricuspid valve scaffold based on polyurethane for heart valve tissue engineering
625
Fabrication and characterization of nanometer CaP(aggregate)/Al2O3 composite coating on titanium
626
Fabrication and characterization of nanometer CaP(aggregate)/Al2O3 composite coating on titanium
627
Fabrication and characterization of nanoporous SiO2 ceramics via pyrolysis of silicone resin filled with nanometer SiO2 powders
628
Fabrication and characterization of nanostructured Ni–IrO2 electrodes for water electrolysis
629
Fabrication and characterization of nanostructured Ti6Al4V powder from machining scraps
630
Fabrication and characterization of nanostructured TiO2 and turmeric spent incorporated polystyrene hybrid nano composites
631
Fabrication and characterization of nanostructured TiO2 and turmeric spent incorporated polystyrene hybrid nano composites
632
Fabrication and characterization of neat and aluminium-doped titanium (IV) oxide fibers prepared by combined sol–gel and electrospinning techniques
633
Fabrication and characterization of new Er3+ doped niobium borophosphate glass fiber
634
Fabrication and characterization of new semiconducting nanomaterials composed of natural layered silicates (Na+-MMT), natural rubber (NR), and polypyrrole (PPy)
635
Fabrication and characterization of Ni/ScSZ cermet anodes for IT-SOFCs
636
Fabrication and characterization of NiCoZn–M (M: Ag, Pd and Pt) electrocatalysts as cathode materials for electrochemical hydrogen production
637
Fabrication and characterization of n-In0.4Ga0.6N/p-Si solar cell
638
Fabrication and characterization of NiO/ZnO p–n junctions by pulsed laser deposition
639
Fabrication and characterization of Ni-supported solid oxide fuel cell
640
Fabrication and characterization of Ni–W solid solution alloys via mechanical alloying and pressureless sintering
641
Fabrication and characterization of non-evaporable porous getter films
642
Fabrication and characterization of n-on-n silicon pixel detectors compatible with the Medipix2 readout chip
643
Fabrication and characterization of n-on-n silicon pixel detectors compatible with the Medipix2 readout chip
644
Fabrication and characterization of nonplanar microelectrode array circuits for use in arthroscopic diagnosis of cartilage diseases
645
Fabrication and characterization of novel antifouling nanofiltration membrane prepared from oxidized multiwalled carbon nanotube/polyethersulfone nanocomposite
646
Fabrication and characterization of novel biomimetic PLLA/cellulose/hydroxyapatite nanocomposite for bone repair applications
647
Fabrication and characterization of novel composite nanofiltration membranes based on zwitterionic O-carboxymethyl chitosan Original Research Article
648
Fabrication and characterization of novel macroporous cellulose–alginate hydrogels
649
Fabrication and Characterization of Novel Mixed-valence Pentaamminechlororuthenium(III) Hexacyanoruthenate(II) Coordination Compound Self-assembled Film
650
Fabrication and characterization of novel semiconductor nanomechanical structures
651
Fabrication and characterization of novel SiO2-PAMPS/PSF hybrid ultrafiltration membrane with high water flux Original Research Article
652
Fabrication and characterization of n-type aluminum-boron co-doped ZnO on p-type silicon (n-AZB/p-Si) heterojunction diodes
653
Fabrication and characterization of n-ZnO:Eu/p-ZnO:(Ag, N) homojunction by spray pyrolysis
654
Fabrication and characterization of ODS austenitic steels
655
Fabrication and characterization of OLED with Mg complex of 5-chloro-8-hydroxyquinoline as emission layer
656
Fabrication and characterization of OLEDs using MEH-PPV and SWCNT nanocomposites
657
Fabrication and characterization of OLEDs using PEDOT:PSS and MWCNT nanocomposites
658
Fabrication and characterization of ophthalmically compatible hydrogels composed of poly(dimethyl siloxane-urethane)/Pluronic F127
659
Fabrication and characterization of optical biosensors using polymer hydrogel microparticles and enzyme–quantum dot conjugates
660
Fabrication and characterization of optoelectronic near-field probes based on an SFM cantilever design
661
Fabrication and characterization of optoelectronic near-field probes based on an SFM cantilever design
662
Fabrication and characterization of ordered macroporous semiconductors CdS by colloidal crystal template
663
Fabrication and characterization of organic–inorganic perovskite films containing fullerene derivatives
664
Fabrication and characterization of oriented carbon atom wires assembled on gold
665
Fabrication and characterization of ovalbumin films for wound dressing applications
666
Fabrication and characterization of oxygen-diffused titanium for biomedical applications
667
Fabrication and characterization of PCL/gelatin composite nanofibrous scaffold for tissue engineering applications by electrospinning method
668
Fabrication and characterization of Pd/Ag alloy hollow spheres by the solvothermal method
669
Fabrication and characterization of Pd/Nb40Ti30Ni30/Pd/porous nickel support composite membrane for hydrogen separation and purification
670
Fabrication and characterization of PE/MMT nanocomposites via copolymerization of ethylene and in situ formed a-olefins
671
Fabrication and characterization of permeable degradable poly(dl-lactide-co-glycolide) (PLGA) hollow fiber phase inversion membranes for use as nerve tract guidance channels
672
Fabrication and characterization of perovskite CaZrO3 oxide thin films
673
Fabrication and characterization of photocatalytic activity of Fe3O4-doped CdS hollow spheres Original Research Article
674
Fabrication and characterization of photocurable inorganic–organic hybrid materials using organically modified colloidal-silica nanoparticles and acryl resin
675
Fabrication and characterization of photoelectrochemical (PEC) solar cells based on 0.1% indium-doped CdSe0.7Te0.3 thin-film electrode
676
Fabrication and characterization of photonic devices directly written in glass using femtosecond laser pulses
677
Fabrication and characterization of planar-type SOFC unit cells using the tape-casting/lamination/co-firing method
678
Fabrication and characterization of plasma-sprayed HA / SiO2 coatings for biomedical application
679
Fabrication and characterization of P–N dual acceptor doped p-type ZnO thin films
680
Fabrication and characterization of polliwog-like Sn/Zn2SnO4 heterostructure nanocrystal and their gas sensing properties
681
Fabrication and characterization of poly (vinyl alcohol)/chitosan blend nanofibers produced by electrospinning method
682
Fabrication and Characterization of Poly Vinyl Alcohol/ Poly Vinyl Pyrrolidone/MnTiO Nanocomposite Membranes for PEM Fuel Cells
683
Fabrication and characterization of poly(3,4-ethylenedioxythiophene)/gold nanocomposite via in-situ redox cycle system
684
Fabrication and characterization of poly(lactic-co-glycolic acid)/polyvinyl alcohol blended hollow fibre membranes for tissue engineering applications
685
Fabrication and characterization of poly(l-lactic acid) 3D nanofibrous scaffolds with controlled architecture by liquid–liquid phase separation from a ternary polymer–solvent system
686
Fabrication and characterization of poly(l-lactic acid) gels induced by fibrous complex crystallization with solvents
687
Fabrication and characterization of poly(l-lactide-co-glycolide) knitted mesh-reinforced collagen–chitosan hybrid scaffolds for dermal tissue engineering
688
Fabrication and characterization of poly(l-lactide-co-glycolide) knitted mesh-reinforced collagen–chitosan hybrid scaffolds for dermal tissue engineering
689
Fabrication and characterization of poly(phenylene oxide)/SBA-15/carbon molecule sieve multilayer mixed matrix membrane for gas separation
690
Fabrication and characterization of poly(vinyl alcohol)/alginate blend nanofibers by electrospinning method
691
Fabrication and characterization of poly(vinyl alcohol)/chitosan hydrogel thin films via UV irradiation
692
Fabrication and characterization of poly(vinyl alcohol)/montmorillonite/poly(styrene sulfonic acid) proton-conducting composite membranes for direct methanol fuel cells
693
Fabrication and characterization of poly(vinylferrocenium) perchlorate/poly(3,4-ethylenedioxythiophene) composite-coated electrode in methylene chloride
694
Fabrication and characterization of poly(γ-glutamic acid)-graft-chondroitin sulfate/polycaprolactone porous scaffolds for cartilage tissue engineering
695
Fabrication and characterization of poly-(ε)-caprolactone and bioactive glass composites for tissue engineering applications
696
Fabrication and characterization of poly[(2-methoxy-5-(2′-ethyl-hexyloxy)phenylene vinylene] (MEH-PPV) Langmuir–Schaefer films and their application as photoelectrochemical cells
697
Fabrication and characterization of polyamide 6,6/organo-montmorillonite nanocomposites with and without a maleated polyolefin elastomer as a toughener
698
Fabrication and characterization of polyamide thin film nanocomposite (TFN) nanofiltration membrane impregnated with TiO2 nanoparticles Original Research Article
699
Fabrication and characterization of polyaniline coated carbon nanofiber for supercapacitor Original Research Article
700
Fabrication and characterization of polyaniline/porous silicon heterojunction
701
Fabrication and characterization of polyaniline/xanthan gum nanocomposite: Conductivity and thermal properties
702
Fabrication and characterization of polyaniline-based gas sensor by ultra-thin film technology
703
FABRICATION AND CHARACTERIZATION OF POLYANILINE-GRAPHENE COMPOSITE AS ELECTRODE IN ELECTROCHEMICAL CAPACITOR
704
Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution
705
Fabrication and characterization of polycrystalline silicon nanowires with silver-assistance by electroless deposition
706
Fabrication and characterization of poly-d-l-lactide/nano-hydroxyapatite composite scaffolds with poly (ethylene glycol) coating and dexamethasone releasing
707
Fabrication and characterization of polyimide–zeolite L mixed matrix membranes for gas separations
708
Fabrication and characterization of polymer-based magnetic composite nanotubes and nanorods
709
Fabrication and characterization of polymeric microfiltration membranes using aperture array lithography
710
Fabrication and characterization of polymethylmethacrylate (PMMA) thin film by plasma polymerization used for cell culture
711
Fabrication and characterization of polysilsesquioxanes nanocomposites based chemical sensor
712
Fabrication and characterization of polyvinylidenefluoride-co-hexafluoropropylene (PVDF-HFP) electrospun membranes for direct contact membrane distillation
713
Fabrication and characterization of porous bioceramic composites based on hydroxyapatite and titania
714
Fabrication and Characterization of Porous b-Tricalcium Phosphate Scaffold for Bone Regeneration
715
Fabrication and characterization of porous calcium polyphosphate scaffolds
716
Fabrication and characterization of porous hydroxyapatite granules
717
Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering
718
Fabrication and characterization of porous silver powder prepared by spray drying and calcining technology
719
Fabrication and characterization of porous tricalcium phosphate ceramics
720
Fabrication and characterization of porous ZrO2 with a high volume fraction of fine closed pores
721
Fabrication and characterization of porphyrin dye-sensitized solar cells
722
Fabrication and characterization of positively charged hybrid ultrafiltration and nanofiltration membranes via the in-situ exfoliation of Mg/Al hydrotalcite Original Research Article
723
Fabrication and characterization of potassium–sodium niobate piezoelectric ceramics by spark-plasma-sintering method
724
Fabrication and characterization of PPO/PVP blend carbon molecular sieve membranes for H2/N2 and H2/CH4 separation
725
Fabrication and characterization of pseudo-ceramide-based liposomal membranes
726
Fabrication and characterization of Pt intermediate transparent and conducting ITO/Pt/ITO multilayer films Original Research Article
727
Fabrication and characterization of pure and modified Co3O4 nanocatalyst and their application for photocatalytic degradation of eosine blue dye: a comparative study
728
Fabrication and characterization of p-ZnO/n-Zn0.8Cd0.2O/n-ZnO heterojunction
729
Fabrication and characterization of random chopped fiber reinforced reaction bonded silicon carbide composite
730
Fabrication and characterization of raspberry-like PSt/SiO2 composite microspheres via miniemulsion polymerization
731
Fabrication and characterization of reaction-bonded silicon carbide with poly(methyl methacrylate) as pore-forming agent
732
Fabrication and characterization of recyclable carbon nanotube/polyvinyl butyral composite fiber
733
Fabrication and characterization of reference 9Cr and 12Cr-ODS low activation ferritic/martensitic steels
734
Fabrication and characterization of rhodamine 6G entrapped sol–gel film test strip for virtually specific and sensitive sensing of nitrite
735
Fabrication and characterization of rigid magnetic monodisperse microspheres for protein adsorption
736
Fabrication and characterization of rod-like nano-hydroxyapatite on MAO coating supported on Mg–Zn–Ca alloy
737
Fabrication and Characterization of Rutile TiO2 Nanocrystals by Water Soluble Precursor
738
Fabrication and characterization of scaffold from cadaver goat-lung tissue for skin tissue engineering applications
739
Fabrication and characterization of Schottky barrier diodes with tetracyanoquinodimethane doped with bis(β-naphthyl)-tetrathiafulvalene
740
Fabrication and characterization of Schottky diodes and thin films based on poly(o-toluidine) deposited by spincoating technique
741
Fabrication and characterization of self-assembled multifunctional coating deposition on a cellulose substrate
742
Fabrication and characterization of self-assembled Nafion–SiO2–ePTFE composite membrane of PEM fuel cell
743
Fabrication and characterization of self-doped poly(aniline-co-anthranilic acid) nanorods in bundles
744
Fabrication and characterization of shape anisotropy AlN/FeCoSiB magnetoelectric composite films
745
Fabrication and characterization of SiC rod-particulate-reinforced reaction-bonded Si3N4 composites
746
Fabrication and characterization of SiC whisker reinforced reaction bonded SiC composite
747
Fabrication and characterization of SiC/MoSi2 composites
748
Fabrication and characterization of SiC/MoSi2 composites
749
Fabrication and characterization of SiCf/SiC composite by CVI using the whiskering process
750
Fabrication and characterization of SiCf/SiC composites produced by the slurry infiltration process
751
Fabrication and characterization of SiCw/MoSi2 composite from COSHSed powder
752
Fabrication and characterization of silicon detectors for use in radiotherapy dosimetry, pre-irradiated by high-energy electrons
753
Fabrication and characterization of silicon detectors for use in radiotherapy dosimetry, pre-irradiated by high-energy electrons
754
Fabrication and characterization of silk fibroin/bioactive glass composite films
755
Fabrication and characterization of silk/forsterite composites for tissue engineering applications
756
Fabrication and characterization of silver inverse opals
757
Fabrication and characterization of silver inverse opals
758
Fabrication and characterization of silver-based solid-state primary batteries
759
Fabrication and characterization of single walled nanotube supercapacitor electrodes with uniform pores using electrophoretic deposition
760
Fabrication and characterization of single-walled carbon nanotube fiber for electronics applications Original Research Article
761
Fabrication and characterization of sintered TiC–SiC composites
762
Fabrication and characterization of SiO2 microcantilever for microsensor application
763
Fabrication and characterization of six electrospun poly(α-hydroxy ester)-based fibrous scaffolds for tissue engineering applications
764
Fabrication and characterization of smooth high aspect ratio zirconia nanotubes
765
Fabrication and characterization of SnO2 and SnS2 nanobiosensor in the Presence of Aspergillus Niger Fungi
766
Fabrication and characterization of sol–gel derived 45S5 Bioglass®–ceramic scaffolds
767
Fabrication and characterization of sol–gel derived hydroxyapatite/zirconia composite nanopowders with various yttria contents
768
Fabrication and characterization of solid state proton conductor (NH4)2SiP4O13–NH4PO3 for fuel cells operated at 150–250 °C
769
Fabrication and characterization of solid-state cells using CuI100—x—(silver ortho/pyrophosphate)x (0less-than-or-equals, slantxless-than-or-equals, slant60) mixed systems as solid electrolytes
770
Fabrication and characterization of solid-state thermal neutron detectors based on hexagonal boron nitride epilayers
771
Fabrication and characterization of solid-state thermal neutron detectors based on hexagonal boron nitride epilayers
772
Fabrication and Characterization of Spongy Denuded Amniotic Membrane Based Scaffold for Tissue Engineering
773
Fabrication and characterization of spray dried Al2O3–ZrO2–Y2O3 powders treated by calcining and plasma
774
Fabrication and characterization of sputtered titanium dioxide films
775
Fabrication and characterization of SrZrO3 thin films prepared by sol–gel
776
Fabrication and Characterization of Superhydrophobic Layer of Low Density Polyethylene on Polypropylene Hollow Fiber Membrane
777
Fabrication and Characterization of Superhydrophobic Layer of Low Density Polyethylene on Polypropylene Hollow Fiber Membrane
778
Fabrication and characterization of superhydrophobic poly (vinylidene fluoride) membrane for direct contact membrane distillation Original Research Article
779
Fabrication and characterization of superhydrophobic polypropylene hollow fiber membranes for carbon dioxide absorption
780
Fabrication and characterization of superhydrophobic surface by using water vapor impingement method
781
Fabrication and characterization of superhydrophobic thin films based on TEOS/RF hybrid
782
Fabrication and characterization of superporous cellulose bead for high-speed protein chromatography
783
Fabrication and characterization of surface type Schottky diode hydrogen sensor using polyaniline/porous 3C-SiC
784
Fabrication and characterization of suspended single-walled carbon nanotubes
785
Fabrication and Characterization of Targets for Shock Propagation and Radiation Burnthrough Measurements on Be-0.9 AT. % Cu Alloy
786
Fabrication and characterization of temperature-, pH- and magnetic-field-sensitive organic/inorganic hybrid poly (ethylene glycol)-based hydrogels
787
Fabrication and characterization of tetracyanoquinodimethane/phthalocyanine solar cells
788
Fabrication and characterization of tetrapod-like ZnO nanostructures prepared by catalyst-free thermal evaporation
789
Fabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor
790
Fabrication and characterization of the hierarchical structure for superhydrophobicity and self-cleaning
791
Fabrication and characterization of the hierarchical structure for superhydrophobicity and self-cleaning
792
Fabrication and characterization of the mechanical properties of multi-walled carbon nanotube-reinforced epoxy resins by e-beam irradiation
793
Fabrication and characterization of the Ni–P–Al–W multicomponent coatings
794
Fabrication and characterization of the pentacene thin film transistor with a Gd2O3 gate insulator
795
Fabrication and Characterization of the Ti-6Al-4V/Mg Scaffold
796
Fabrication and characterization of thermal evaporated n-Si/ p-ZnTe thin film heterojunction diodes
797
Fabrication and characterization of thin film electrolytes deposited by RF magnetron sputtering for low temperature solid oxide fuel cells
798
Fabrication and characterization of thin nano-hydroxyapatite coatings on titanium
799
Fabrication and characterization of thin Nb2O5 blocking layers for ionic liquid-based dye-sensitized solar cells
800
Fabrication and characterization of thin ΔE detectors for spectroscopic application
801
Fabrication and characterization of thin ΔE detectors for spectroscopic application
802
Fabrication and characterization of three-dimensional carbon electrodes for lithium-ion batteries
803
Fabrication and characterization of three-dimensional cellular-matrix composites reinforced with woven carbon fabric
804
Fabrication and characterization of three-dimensional macroscopic all-carbon scaffolds Original Research Article
805
Fabrication and characterization of three-dimensional nanofiber membrance of PCL–MWCNTs by electrospinning
806
Fabrication and characterization of TiB2/TiC and tungsten co-sputtered wear coatings
807
Fabrication and characterization of TiC/Al composites
808
Fabrication and characterization of TiC/Al composites
809
Fabrication and characterization of TiC-particle-reinforced MoSi2 composites
810
Fabrication and characterization of Ti–Cu clad materials by indirect extrusion
811
Fabrication and characterization of TiO2/whey protein isolate nanocomposite film
812
Fabrication and characterization of TiO2–epoxy nanocomposite
813
Fabrication and characterization of TiO2–ZnO composite nanofibers
814
Fabrication and characterization of titania inverse opals using supercritical carbon dioxide
815
Fabrication and characterization of transparent p–n and p–i–n heterojunctions prepared by spray pyrolysis technique: Effect of post-annealing process and intrinsic middle layer
816
Fabrication and characterization of TS-1 films on α-Al2O3 substrates using TiCl3 as titanium source
817
Fabrication and characterization of tunable polysaccharide hydrogel blends for neural repair
818
Fabrication and characterization of tungsten and graphite based PFC for divertor target elements of ITER like tokamak application
819
Fabrication and characterization of ultra-fine grained tungsten by resistance sintering under ultra-high pressure
820
Fabrication and characterization of ultrafine WC–8Co–xCeB6 cemented carbides
821
Fabrication and characterization of ultra-high resolution multilayer-coated blazed gratings
822
Fabrication and characterization of ultra-high resolution multilayer-coated blazed gratings
823
Fabrication and characterization of ultra-thin NbN hot electron bolometer for near infrared single photon detection
824
Fabrication and characterization of ultra-thin NbN hot electron bolometer for near infrared single photon detection
825
Fabrication and characterization of uranium–thorium–zirconium hydrides
826
Fabrication and characterization of U-shaped fiber-optic pH probes
827
Fabrication and characterization of vacuum plasma sprayed W/Cu-composites for extreme thermal conditions
828
Fabrication and characterization of vertically aligned ZnMgO/ZnO nanowire arrays
829
Fabrication and Characterization of Visible Light active Fe-TiO 2 Nanocomposites as Nanophotocatalyst
830
Fabrication and characterization of W–15Cu composite powders by a novel mechano-chemical process
831
Fabrication and characterization of water-based polyurethane/polyaniline conducting blend films
832
Fabrication and characterization of well-dispersed single-walled carbon nanotube/polyaniline composites
833
Fabrication and characterization of WO3 flocky microspheres induced by ethanol
834
Fabrication and characterization of Y2O3 stabilized ZrO2 films deposited with aerosol-assisted MOCVD
835
Fabrication and characterization of Y-Ba-Cu-Oxide whisker
836
Fabrication and characterization of YSZ/Ni-YSZ bi-layered composites using thermoplastic coextrusion
837
Fabrication and characterization of YVO4:Eu3+ nanomaterials by the micro-wave technique
838
Fabrication and characterization of zinc oxide nanoparticle coated magnetic iron oxide: Effect of S-layers adsorption on surface of oxide
839
Fabrication and characterization of zinc oxide-decorated titania nanoporous by electrochemical anodizing-chemical bath deposition techniques: visible light active photocatalysts with good stability
840
Fabrication and characterization of zinc phosphate passivation layers for ZnO-based varistor
841
Fabrication and Characterization of Zinc Sulfide Nanoparticles and Nanocomposites Prepared via a Simple Chemical Precipitation Method
842
Fabrication and characterization of zirconium hydroxide-carboxymethyl cellulose sodium/plasticized Trichosanthes Kirilowii starch nanocomposites
843
Fabrication and characterization of ZnO and ZnMgO nanostructures grown using a ZnO/ZnMgO compound as the source material
844
Fabrication and characterization of ZnO branched nanorods and ZnO/NiO heterojunction electrodes by chemical solution method
845
Fabrication and characterization of ZnO comb-like nanostructures
846
Fabrication and characterization of ZnO modified bioactive glass nanoparticles
847
Fabrication and characterization of ZnO nanowire transistors with organic polymer as a dielectric layer
848
Fabrication and characterization of ZnO nanowires and nanodiscs grown in modified thermal evaporation set-up
849
Fabrication and characterization of ZnO-coated multi-walled carbon nanotubes with enhanced photocatalytic activity
850
Fabrication and characterization of ZnO-doped Nd(Co1/2Ti1/2)O3 thin films prepared by rf magnetron sputtering
851
Fabrication and characterization of ZnTPP:PCBM bulk heterojunction (BHJ) solar cells Original Research Article
852
Fabrication and characterization of ZnxCd1−xS nanoparticles in chitosan alginate nanocomposite films
853
Fabrication and characterization of Zn–ZnO core–shell microspheres from nanorods
854
Fabrication and characterization of β-Ga2O3 optical nanowires
855
Fabrication and characterization of γ-Al2O3–clay composite ultrafiltration membrane for the separation of electrolytes from its aqueous solution
856
Fabrication and characterizations of a novel drug delivery device liposomes-in-microsphere (LIM)
857
Fabrication and characterizations of a polymer hybrid OA/MA/St-TiO2
858
Fabrication and characterizations of biodegradable jute reinforced soy based green composites
859
Fabrication and characterizations of crosslinked porous polymer films with varying chemical compositions
860
Fabrication and Charge Modification of Ceramic Membranes Using Copper Nanoparticles for Desalination
861
Fabrication and charge/discharge behaviour of some lithium solid polymer electrolyte cells
862
Fabrication and chemical surface modification of mesoporous silicon for biomedical applications
863
Fabrication and CO gas-sensing properties of Pt-functionalized Ga2O3 nanowires
864
Fabrication and CO2 separation performance of carbon membranes doped with TiO2 nanoparticles
865
Fabrication and comparison of 3D Cf/ZrC–SiC composites using ZrC particles/polycarbosilane and ZrC precursor/polycarbosilane
866
Fabrication and comparison of highly efficient Cu incorporated TiO2 photocatalyst for hydrogen generation from water
867
Fabrication and comparison of PP (blend)-based (nano)composites—Effect of PP matrix flow property
868
Fabrication and compression properties of functionally graded foam with uniform pore structures consisting of dissimilar A1050 and A6061 aluminum alloys
869
Fabrication and compressive strength of porous hydroxyapatite scaffolds with a functionally graded core/shell structure
870
Fabrication and conductance characterization of single C60 molecular junction in solutions
871
Fabrication and configuration of carbon nanotube probes in atomic force microscopy
872
Fabrication and consolidation behavior of Al 6061 nanocomposite powders reinforced by multi-walled carbon nanotubes
873
FABRICATION AND CONTACTING INDIVIDUAL GOLD NANOWIRES
874
Fabrication and corrosion behavior of Si/HA nano-composite coatings on biodegradable Mg–Zn–Mn–Ca alloy
875
Fabrication and corrosion resistance of calcium phosphate glass-ceramic coated Mg alloy via a PEG assisted sol–gel method
876
Fabrication and corrosion resistance of HVOF-sprayed Ni2Si intermetallic compound
877
Fabrication and critical current density in 16-filament stainless steel/Fe/MgB2 square wire
878
Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures
879
Fabrication and crystallization behaviors of sputtered Ni–Cu–P films on tool steel
880
Fabrication and current-drive of SiGe/Si Micro-origami epitaxial MEMS device on SOI substrate
881
Fabrication and cutting performance of cemented tungsten carbide micro-cutting tools
882
Fabrication and cyto-compatibility of Fe3O4/SiO2/graphene–CdTe QDs/CS nanocomposites for drug delivery
883
Fabrication and cytocompatibility of spherical magnesium ammonium phosphate granules
884
Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays
885
Fabrication and degradation behavior of micro-arc oxidized biomedical magnesium alloy wires
886
Fabrication and Degradation of Polyperoxides by a Radical Chain Process under Mild Conditions
887
Fabrication and design aspects of high-temperature compact diffusion bonded heat exchangers
888
Fabrication and design of multi-layered radar absorbing structures of MWNT-filled glass/epoxy plain-weave composites
889
Fabrication and development of interfacial polymerized thin-film composite nanofiltration membrane using different surfactants in organic phase; study of morphology and performance
890
Fabrication and device characteristics of strained-Si-on-insulator (strained-SOI) CMOS
891
Fabrication and dielectric properties of barium titanate-based glass ceramics for tunable microwave LTCC application
892
Fabrication and dielectric properties of oriented polyvinylidene fluoride nanocomposites incorporated with graphene nanosheets
893
Fabrication and dielectric properties of the BaTiO3–polymer nano-composite thin films
894
Fabrication and dielectric properties of transparent PZN–BT ceramic
895
Fabrication and dielectric property of ferroelectric PLZT films grown on metal foils
896
Fabrication and diffusion barrier properties of nanoscale Ta/Ta-N bi-layer
897
Fabrication and direct bonding of photosensitive multicomponent silicate glasses for lossless planar waveguide splitters
898
Fabrication and dissolution behavior of hollow hydroxyapatite microspheres intended for controlled drug release
899
Fabrication and distribution characteristics of polyurethane/single-walled carbon nanotube composite with anisotropic structure
900
Fabrication and effective thermal conductivity of multi-walled carbon nanotubes reinforced Cu matrix composites for heat sink applications
901
Fabrication and efficient photocatalytic activity of porous CdS-pillared tetratitanate nanohybrid
902
Fabrication and efficient photocatalytic degradation of methylene blue over CuO/BiVO4 composite under visible-light irradiation
903
Fabrication and Efficient Photochromism of the Mixed Langmuir–Blodgett Films of a Watermiscible Azobenzene Amphiphile and Long-chain Alkylammoniums
904
Fabrication and efficient visible light-induced photocatalytic activity of Bi2WO6/BiVO4 heterojunction
905
Fabrication and elastic properties of InAs freestanding structures based on InAs/GaAs(1 1 1)A heteroepitaxial systems
906
Fabrication and electric capacitive behavior of hetero-junction carbon nanoclusters by using secondary chemical vapor deposition
907
Fabrication and electric measurements of nanostructures inside transmission electron microscope
908
Fabrication and electric measurements of nanostructures inside transmission electron microscope
909
Fabrication and electric properties of PZN-based ceramics using modified columbite method
910
Fabrication and electrical characterisation of strontium and titanium-doped lanthanum scandate
911
Fabrication and electrical characteristics of ferredoxin adsorbed poly-l-lysin/11-MUA hetero-self-assembly layer
912
Fabrication and electrical characteristics of organic thin film transistor using π-conjugated dendrimer
913
Fabrication and electrical characteristics of piezoelectric PMN–PZN–PZT ceramic transformers
914
Fabrication and electrical characterization of a MOS memory device containing self-assembled metallic nanoparticles
915
Fabrication and electrical characterization of p-Sb2S3/n-Si heterojunctions for solar cells application
916
Fabrication and electrical characterization of Schottky diode based on 2-amino-4, 5-imidazoledicarbonitrile (AIDCN)
917
Fabrication and electrical characterization of nanocrystalline ZnO/Si heterojunctions
918
Fabrication and electrical conductivity of suspended carbon nanofiber arrays Original Research Article
919
Fabrication and Electrical Properties of Cyano Acrylate Terpolymer Films for Insulator Application
920
Fabrication and electrical properties of field effect transistor based on ferroelectric insulator and pentacene film
921
Fabrication and electrical properties of fullerene/phthalocyaninatometal Langmuir-Blodgett films
922
Fabrication and electrical properties of graphene nanoribbons
923
Fabrication and electrical properties of lead zirconate titanate thick films by the new sol–gel method
924
Fabrication and electrical properties of Li3PO4-based composite electrolyte films
925
Fabrication and electrical properties of metal-coated acrylate rubber microspheres by electroless plating
926
Fabrication and electrical properties of ordered two-dimensional hollow ZnO shells’ arrays Original Research Article
927
Fabrication and electrical properties of Pb(Co1/3Nb2/3)O3 ceramics
928
Fabrication and electrical properties of polycrystalline Si films on glass substrates
929
Fabrication and electrical properties of proton conducting polymer hybridized with apatite compounds
930
Fabrication and electrical properties of Si-based La10−xBix(SiO4)6O3 apatite ionic conductor
931
Fabrication and electrical properties of textured (Na,K)0.5Bi0.5TiO3 ceramics by reactive-templated grain growth
932
Fabrication and electro chemical properties of poly vinyl alcohol/para toluene sulfonic acid membranes for the applications of DMFC
933
Fabrication and electrocatalytic application of functionalized nanoporous carbon material with different transition metal oxides
934
FABRICATION AND ELECTROCATALYTIC APPLICATION OF NI-MODIFIED ELECTRODE TOWARD DETECTION OF PARACETAMOL
935
Fabrication and electrochemical activity of Ni-attached carbon nanotube electrodes for hydrogen storage in alkali electrolyte
936
Fabrication and electrochemical behavior of a sol–gel-derived carbon ceramic composite electrode entrapping 2:18-molybdodiphosphate
937
Fabrication and Electrochemical Behavior of Monoclinic CuO and CuO/Graphite Composite Nanoparticles as Cathode in an Alkaline Zn-CuO Battery
938
Fabrication and electrochemical behavior of nitride fuel for future applications
939
Fabrication and electrochemical behavior of single-walled carbon nanotube/graphite-based electrode
940
Fabrication and electrochemical capacitance of polyaniline/titanium nitride core–shell nanowire arrays
941
Fabrication and electrochemical capacitance of polyaniline/titanium nitride core–shell nanowire arrays
942
Fabrication and electrochemical characteristics of all-solid-state lithium-ion rechargeable batteries composed of LiMn2O4 positive and V2O5 negative electrodes
943
Fabrication and electrochemical characterization of a vertical array of MnO2 nanowires grown on silicon substrates as a cathode material for lithium rechargeable batteries
944
Fabrication and electrochemical characterization of cobalt-based layered double hydroxide nanosheet thin-film electrodes
945
Fabrication and electrochemical characterization of electrostatic assembly of polyelectrolyte-functionalized ionic liquid and Prussian blue ultrathin films
946
Fabrication and electrochemical characterization of planar Pt–CGO microstructures Original Research Article
947
Fabrication and electrochemical characterization of PVC based electrodialysis heterogeneous ion exchange membranes filled with Fe3O4 nanoparticles
948
Fabrication and electrochemical characterization of tape cast BaCe0.5Zr0.3Y0.16Zn0.04O3 − δ electrode/electrolyte structures
949
Fabrication and electrochemical characterization of two-dimensional ordered nanoporous manganese oxide for supercapacitor applications
950
Fabrication and electrochemical performance of Poly (2,5-benzimidazole) (ABPBI)-based MEA by catalyst coated membrane (CCM) method for high-temperature polymer electrolyte fuel cells
951
Fabrication and electrochemical properties of an interdigitated array electrode in a microfabricated wall-jet cell
952
Fabrication and electrochemical properties of carbon nanotube film electrodes Original Research Article
953
Fabrication and electrochemical properties of carbon nanotube/polypyrrole composite film electrodes with controlled pore size
954
Fabrication and electrochemical properties of lithium-ion batteries for power tools
955
Fabrication and electrochemical properties of polyvinyl alcohol/poly(3,4-ethylenedioxythiophene) ultrafine fibers via electrospinning of EDOT monomers with subsequent in situ polymerization
956
Fabrication and electrochemical properties of three-dimensional net architectures of anatase TiO2 and spinel Li4Ti5O12 nanofibers
957
Fabrication and electrochemical property of Ag-doped SiO2 nanostructured ribbons
958
Fabrication and electrochemical sensing performance of a composite film containing a phosphovanadomolybdate and cobalt(II) tetrasulfonate phthalocyanine
959
Fabrication and electrochemistry study of multi-thiol coronary molecule monolayers
960
Fabrication and electrogenerated chemiluminescence properties of uniform octahedral 8-hydroxyquinoline zinc (Znq2)
961
Fabrication and electromagnetic characteristics of electromagnetic wave absorbing sandwich structures
962
Fabrication and electromagnetic characteristics of microwave absorbers containing carbon nanofibers and NiFe particles
963
Fabrication and electromagnetic characteristics of microwave absorbers containing PPY and carbonyl iron composite
964
Fabrication and electromagnetic interference shielding effectiveness of carbon nanotube reinforced carbon fiber/pyrolytic carbon composites
965
Fabrication and electromagnetic properties of soft-core functional particles by way of electroless Ni–Fe–P alloy plating on helical microorganism cells
966
Fabrication and electron field-emission of carbon nanofibers grown on silicon nanoporous pillar array
967
Fabrication and electroosmotic flow measurements in micro- and nanofluidic channels
968
Fabrication and EMI shielding effectiveness of Ag-decorated highly porous poly(vinyl alcohol)/Fe2O3 nanofibrous composites
969
Fabrication and emission properties of Er3+/Yb3+ codoped tellurite glass fiber for broadband optical amplification
970
Fabrication and erosion studies of C–SiC composite Jet Vanes in solid rocket motor exhaust
971
Fabrication and estimation of Au-coated Fe3O4 nanocomposite powders for the separation and purification of biomolecules
972
Fabrication and ethanol-sensing properties of micro gas sensor based on electrospun SnO2 nanofibers
973
Fabrication and evaluation of (PVA/HAp/PCL) bilayer composites as potential scaffolds for bone tissue regeneration application
974
Fabrication and evaluation of [Co(phen)2L]3+-modified DNA-MWCNT and SDS-MWCNT electrodes for electrochemical detection of 6-mercaptopurine
975
Fabrication and evaluation of 100 Ah cylindrical lithium ion battery for electric vehicle applications
976
Fabrication and evaluation of 450 F electrochemical redox supercapacitors using inexpensive and high-performance, polyaniline coated, stainless-steel electrodes
977
Fabrication and evaluation of a Ni/La0.75Sr0.25Cr0.5Fe0.5O3−δ co-impregnated yttria-stabilized zirconia anode for single-chamber solid oxide fuel cells
978
Fabrication and Evaluation of a Noncompliant Molar Distalizing Appliance: Bonded Molar Distalizer
979
Fabrication and evaluation of a passive alkaline membrane micro direct methanol fuel cell
980
Fabrication and evaluation of a ratchet type dielectrophoretic device for particle analysis
981
Fabrication and evaluation of a sustained-release chitosan-based scaffold embedded with PLGA microspheres
982
Fabrication and evaluation of actuators based on polymer electrolyte membranes
983
Fabrication and evaluation of auto-stripped tri-layer wound dressing for extensive burn injury
984
Fabrication and evaluation of biomimetic scaffolds by using collagen–alginate fibrillar gels for potential tissue engineering applications
985
Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing halloysite nanotubes
986
Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing nano fibrillar silicate
987
Fabrication and evaluation of carbon nano fiber filled carbon/epoxy composite
988
Fabrication and evaluation of chiral monolithic column modified by β-cyclodextrin derivatives
989
Fabrication and evaluation of electrospun nanofibrous antimicrobial nylon 6 membranes
990
Fabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation
991
Fabrication and evaluation of inorganic–organic composite protonic conductors using inorganic sols as a dispersoid
992
Fabrication and evaluation of levofloxacin hemihydrate floating tablet
993
Fabrication and evaluation of low-cost agarose–zinc nanoporous composite matrix: Influence of adsorbent density and size distribution on the performance of expanded beds
994
Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites
995
Fabrication and evaluation of Nafion nanocomposite membrane based on ZrO2–TiO2 binary nanoparticles as fuel cell MEA
996
Fabrication and evaluation of Ni-GDC composite anode prepared by aqueous-based tape casting method for low-temperature solid oxide fuel cell
997
Fabrication and Evaluation of Physically Crosslinked Stimuli Sensitive Polymeric Blend of Pva-Gelatin as Drug Delivery System by Freeze Thaw Cycles
998
Fabrication and evaluation of plasma sprayed nanostructured alumina–titania coatings with superior properties
999
Fabrication and evaluation of plasma sprayed nanostructured alumina–titania coatings with superior properties
1000
Fabrication and Evaluation of Pt/M (M= Co, Fe) Chitosan Supported Catalysts for Methanol Electrooxidation: Application in Direct Alcohol Fuel Cell
بازگشت