Record number :
1806994
Title of article :
Surface modification of TiNi alloy through tantalum immersion ion implantation
Author/Authors :
Cheng، نويسنده , , Y and Wei، نويسنده , , C and Gan، نويسنده , , K.Y and Zhao، نويسنده , , L.C، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2004
Pages :
5
From page :
261
To page :
265
Abstract :
TiNi alloy samples were implanted with tantalum at a dose of 3.1×1017 N/cm2 by means of Plasma immersion ion implantation (PIII) method. The surface morphology, chemical composition was characterized by Atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The corrosion resistance, were determined by electrochemical methods in 0.9% NaCl solution at 37 °C. The results show that PIII treatment can increase the open-circuit corrosion potential (Ecorr) and decrease the corrosion current density (Icorr). The pitting potential (Ebr) for the tantalum implanted TiNi alloy is approximately 810 mV, more than 200 mV higher than that of the unimplanted one. The corrosion hystersis loop of the unimplanted TiNi alloy is larger than that of the implanted material, indicating improvement of the repassivating ability and pitting resistance of the TiNi alloys.
Keywords :
Plasma immersion ion implantation , CORROSION RESISTANCE , tantalum , TiNi alloy
Journal title :
Surface and Coatings Technology
Journal title :
Surface and Coatings Technology
Serial Year :
2004
Link To Document :
بازگشت