Title of article :
Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718
Bhatt، نويسنده , , Abhay and Attia، نويسنده , , Helmi and Vargas، نويسنده , , R. and Thomson، نويسنده , , V.، نويسنده ,
Issue Information :
ماهنامه با شماره پیاپی سال 2010
This paper presents the results of an experimental investigation on the wear mechanisms of uncoated tungsten carbide (WC) and coated tools (single-layer (TiAlN) PVD, and triple-layer (TiCN/Al2O3/TiN) CVD) in oblique finish turning of Inconel 718. Tool wear rate and wear mechanisms were evaluated for cutting speeds, 50<V<100 m/min, and feed rates, 0.075<f<0.125 mm/rev, at a constant depth of cut of 0.25 mm. It was concluded that abrasive and adhesive wear were the most dominant wear mechanisms, controlling the deterioration and final failure of the WC tools. While the triple layer CVD coated tools exhibited the highest wear resistance at high cutting speeds and low feeds, uncoated tools outperformed the single and multi-layer coated tools in the low range of cutting speeds and intermediate feeds. The cutting tool with single-layer PVD coating outperformed the other tools at the medium cutting speed.
Wear mechanisms , PVD/CVD coated tools , Finish turning , Inconel 718
Journal title :